Tuning Self‐Assembly of Hole‐Selective Monolayers for Reproducible Perovskite/Silicon Tandem Solar Cells
Small Methods · 2025-07 · 9 (7)
DOI: 10.1002/smtd.202401758 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 25.02.2025. Verfasst von Oussama Er-Raji und 10 weiteren Autor:innen. Beteiligte Einrichtung: Fraunhofer Institute for Solar Energy Systems ISE, Heidenhofstr. 2, 79110, Freiburg, Germany. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Wirtschaft und Klimaschutz, Fraunhofer-Gesellschaft.
Abstract (Originalsprache)
Self‐assemble monolayers (SAMs) have become state‐of‐the‐art hole‐selective contacts for high‐efficiency perovskite‐based solar cells due to their easy processing, passivation capability, and low parasitic absorption. Nevertheless, for the deposition of SAMs with a monolayer thickness and a high packing density on metal oxide substrates, critical challenges persist. To overcome these, the study focuses on the impact of annealing temperature – an intrinsic yet so far unexplored process parameter – during the formation of SAMs. By performing in situ angle‐resolved X‐ray photoelectron spectroscopy combined with advanced data analysis routines, it is revealed that increasing the annealing temperature reduces the formed SAM layer thickness from a multilayer stack of ≈5 nm at 100 °C (conventional temperature employed in literature) to a monolayer at 150 °C. Furthermore, denser adsorption of the SAM to the metal oxide surface is promoted at high temperatures, which enhances the interfacial SAM/perovskite passivation quality. With this strategy, a 1.3% abs power conversion efficiency ( PCE ) increment is obtained in fully‐textured perovskite/silicon tandem solar cells, with improved reproducibility, and a champion device approaching 30% PCE . This study advances the understanding of SAMs formation and presents a promising strategy for further progress in high‐efficiency perovskite‐based solar cells.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Fraunhofer Institute for Solar Energy Systems ISE, Heidenhofstr. 2, 79110, Freiburg, Germany.
- Chair of Photovoltaic Energy Conversion, Department of Sustainable Systems Engineering (INATECH), University of Freiburg, Emmy-Noether-Str.2, 79110, Freiburg, Germany.
- Fraunhofer Center for Silicon Photovoltaics CSP, Otto-Eissfeldt-Str. 12, 06120, Halle, Germany.
- KAUST Solar Center (KSC), Physical Sciences and Engineering Division (PSE), King Abdullah University of Science and Technology (KAUST), Thuwal, 23955, Saudi Arabia.
ORCID-Profile: Oussama Er-Raji
Förderung
- Bundesministerium für Wirtschaft und Klimaschutz
- Fraunhofer-Gesellschaft
Zitieren
APA
Er-Raji, O., Lange, S., Hartwig, C. E., Prasetio, A., Bivour, M., Hermle, M., Turek, M., De Wolf, S., Glunz, S. W., Borchert, J., & Schulze, P. S. C. (2025). Tuning Self‐Assembly of Hole‐Selective Monolayers for Reproducible Perovskite/Silicon Tandem Solar Cells. Small Methods, 9(7). https://doi.org/10.1002/smtd.202401758
Vancouver
Er-Raji O, Lange S, Hartwig CE, Prasetio A, Bivour M, Hermle M, et al. Tuning Self‐Assembly of Hole‐Selective Monolayers for Reproducible Perovskite/Silicon Tandem Solar Cells. Small Methods. 2025;9(7). doi:10.1002/smtd.202401758
BibTeX
@article{ErRaji2025,
author = {Er-Raji, Oussama and Lange, Stefan and Hartwig, Carl Eric and Prasetio, Adi and Bivour, Martin and Hermle, Martin and Turek, Marko and De Wolf, Stefaan and Glunz, Stefan W and Borchert, Juliane and Schulze, Patricia S C},
title = {Tuning Self‐Assembly of Hole‐Selective Monolayers for Reproducible Perovskite/Silicon Tandem Solar Cells},
journal = {Small Methods},
year = {2025},
volume = {9},
number = {7},
doi = {10.1002/smtd.202401758}
}
EUVIMED