Anchor Engineering of Hole‐Selective Enamine‐Based Self‐Assembling Monolayers for Perovskite Solar Cells
Advanced Science · 2026-11 · 13 (62)
DOI: 10.1002/advs.76950 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 21.08.2026. Verfasst von Deimante Krisiune und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Organic Chemistry, Kaunas University of Technology, Kaunas, Lithuania. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, HORIZON Research and Innovation Actions, European Commission.
Abstract (Originalsprache)
The transition to renewable energy sources, particularly solar power, has highlighted the potential of next‐generation perovskite solar cells (PSCs), which have achieved a power conversion efficiency (PCE) over 27%, rivaling conventional silicon solar cells. A critical component in p‐i‐n PSCs is hole transporting layer (HTL), where polymers like PTAA have shown promise but face challenges in efficiency and commercial viability hindered by high costs and complex synthesis. Recently, enamine‐based HTMs have emerged as a promising alternative due to their superior charge transport properties, structure's tunability, and cost‐effectiveness. Additionally, self‐assembling monolayers (SAMs) have been explored to improve inverted PSC performance by enhancing interface properties and reducing material use. This study combines enamine chemistry and self‐assembly to engineer enamine‐based SAMs with various structural units having ─COOH and ─PO(OH) 2 anchoring groups to optimize SAM/TCO interface and reduce recombination losses. The resulting p‐i‐n devices exhibit high power conversion efficiencies (>25.5%) and improved stability. The champion mini‐module with an aperture area of 29.7 cm 2 realizes a PCE of 23.14% with an FF of 83.11%, highlighting the potential of these materials for scalable photovoltaic applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Organic Chemistry, Kaunas University of Technology, Kaunas, Lithuania.
- Institute of Molecular Plus, School of Chemical Engineering and Technology, Tianjin University, Tianjin, China.
- Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, China.
- Department of Physics and Energy Engineering, Amirkabir University of Technology, Tehran, Iran.
ORCID-Profile: Deimante Krisiune, Yuxuan Yang, Hao Tian, Chuanxiao Xiao, Mahan Saberi Zafarghandi, Ali Keshavarz Mohammadian, Kasparas Rakstys, Yi Zhang, Vytautas Getautis
Förderung
- European Union
- HORIZON Research and Innovation Actions
- European Commission
Zitieren
APA
Krisiune, D., Yang, Y., Xu, Y., Tian, H., Xiao, C., Xia, J., Zafarghandi, M. S., Mohammadian, A. K., Astani, N. A., Rakstys, K., Zhang, Y., & Getautis, V. (2026). Anchor Engineering of Hole‐Selective Enamine‐Based Self‐Assembling Monolayers for Perovskite Solar Cells. Advanced Science, 13(62). https://doi.org/10.1002/advs.76950
Vancouver
Krisiune D, Yang Y, Xu Y, Tian H, Xiao C, Xia J, et al. Anchor Engineering of Hole‐Selective Enamine‐Based Self‐Assembling Monolayers for Perovskite Solar Cells. Advanced Science. 2026;13(62). doi:10.1002/advs.76950
BibTeX
@article{Krisiune2026,
author = {Krisiune, Deimante and Yang, Yuxuan and Xu, Yongde and Tian, Hao and Xiao, Chuanxiao and Xia, Jianxing and Zafarghandi, Mahan Saberi and Mohammadian, Ali Keshavarz and Astani, Negar Ashari and Rakstys, Kasparas and Zhang, Yi and Getautis, Vytautas},
title = {Anchor Engineering of Hole‐Selective Enamine‐Based Self‐Assembling Monolayers for Perovskite Solar Cells},
journal = {Advanced Science},
year = {2026},
volume = {13},
number = {62},
doi = {10.1002/advs.76950}
}
EUVIMED