Impact of Electrolyte Formulation on the Phase Behavior and Interphase Formation of Sb/Graphite Electrodes for K‐Ion Batteries
Advanced Science · 2026-09 · 13 (50)
DOI: 10.1002/advs.76057 ↗At a glance
Journal article in Advanced Science, published online on 2026-06-11. Written by Ezzoubair Bendadesse and 10 co-authors. Institution: Institut für Chemie, Humboldt Universität zu Berlin, Berlin, Germany. Cited 1 times so far (Crossref); 40 references. The full text is freely available (open access, CC BY 4.0). Funded by: Bundesministerium für Forschung, Technologie und Raumfahrt (BMFTR).
Abstract (original language)
High capacity alloy‐type materials are attractive anodes for potassium‐ion batteries yet their practical use is hampered by extreme volumetric expansion that causes mechanical instability and rapid capacity fading. Here we show that the electrolyte formulation decisively governs both the electrochemical performance and structural integrity of a high‐capacity Sb/graphite composite anode (70:30 wt.%). A localized high‐concentration electrolyte (LHCE) comprising KFSI, glyme solvents, and 1,1,2,2‐tetrafluoroethyl‐2,2,3,3‐tetrafluoropropyl ether as diluent delivers markedly improved durability, sustaining over 300 cycles with 400 mAh g −1 (1.5 mAh cm −2 ), whereas a conventional carbonate‐based electrolyte (CBE) exhibits rapid degradation. Operando Raman spectroscopy, operando energy‐dispersive X‐ray diffraction, operando electrochemical dilatometry, and ex situ XPS and TEM reveal that the benefit arises from a two‐dimensional electrolyte effect on both surface and bulk electrode behavior. The CBE promotes crystalline multiphase K–Sb alloying together with pronounced graphite participation and forms a thick, organic‐rich SEI, leading to large, poorly reversible swelling and mechanical damage. In contrast, the LHCE favors predominantly amorphous K x Sb formation, suppresses deep K + intercalation into graphite, and forms a thin inorganic, KF‐rich interphase that mitigates internal strain. These insights link solvation, interphase chemistry, and chemo‐mechanics, guiding electrolyte design for stable alloy anodes.
Subjects
Author keywords
Authors and institutions
- Institut für Chemie, Humboldt Universität zu Berlin, Berlin, Germany.
- Physikalisch-Chemisches Institut, Justus-Liebig-Universität Gießen, Gießen, Germany.
- Joint Research group for operando battery analysis (CE-GOBA), Helmholtz-Zentrum Berlin für Materialien und Energie (HZB), Berlin, Germany.
- BAM Federal Institute For Materials Research and Testing, Berlin, Germany.
- Dept. Microstructure & Residual Stress Analysis (CE-AME), Helmholtz-Zentrum Berlin für Materialien und Energie (HZB), Berlin, Germany.
- Wolfram Chemie GmbH, Berlin, Germany.
ORCID profiles: Ezzoubair Bendadesse, Zeynep Erdol, Mirko Boin, Philipp Adelhelm
Funding
- Bundesministerium für Forschung, Technologie und Raumfahrt (BMFTR)
Cite
APA
Bendadesse, E., Wacha, M., Erdol, Z., Sun, Y., Prinz, C., Boin, M., Klaus, M., Mishurova, T., Wolfram, T., Janek, J., & Adelhelm, P. (2026). Impact of Electrolyte Formulation on the Phase Behavior and Interphase Formation of Sb/Graphite Electrodes for K‐Ion Batteries. Advanced Science, 13(50). https://doi.org/10.1002/advs.76057
Vancouver
Bendadesse E, Wacha M, Erdol Z, Sun Y, Prinz C, Boin M, et al. Impact of Electrolyte Formulation on the Phase Behavior and Interphase Formation of Sb/Graphite Electrodes for K‐Ion Batteries. Advanced Science. 2026;13(50). doi:10.1002/advs.76057
BibTeX
@article{Bendadesse2026,
author = {Bendadesse, Ezzoubair and Wacha, Max and Erdol, Zeynep and Sun, Yanan and Prinz, Carsten and Boin, Mirko and Klaus, Manuela and Mishurova, Tatiana and Wolfram, Till and Janek, Jürgen and Adelhelm, Philipp},
title = {Impact of Electrolyte Formulation on the Phase Behavior and Interphase Formation of Sb/Graphite Electrodes for K‐Ion Batteries},
journal = {Advanced Science},
year = {2026},
volume = {13},
number = {50},
doi = {10.1002/advs.76057}
}
EUVIMED