Mechanistic Control of Cathode–Electrolyte Interphase Formation in Gel Polymer Electrolyte for Lithium‐Ion Batteries
Angewandte Chemie International Edition · 09.11.2026 · 65 (46)
DOI: 10.1002/anie.1297472 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 28.09.2026. Verfasst von Sang Goo Kang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomolecular Engineering, Yonsei University, Seodaemun-gu, Seoul, Republic of Korea. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ministry of Trade, Industry & Energy (MOTIE, Korea), Ministry of Education (MOE) and the Seoul Metropolitan Government.
Abstract (Originalsprache)
In‐situ gel polymer electrolytes (GPEs) have attracted attention as promising candidates for next‐generation lithium‐ion batteries, offering superior interfacial compatibility and enhanced safety compared with conventional liquid electrolytes. However, the issue of residual monomers remaining after polymerization has not been adequately addressed. They readily decompose at the high‐Ni cathode (NCM) surface during the early stage of formation, generating an organic‐rich layer within the inner cathode–electrolyte interphase (CEI) and disrupting the normal CEI‐forming pathway. Here, we present a strategy that combines a molecular additive, tris(4‐fluorophenyl)phosphine (TFPP), with a tailored formation protocol to mitigate monomer‐induced degradation. Prior to oxidative decomposition, TFPP modifies the interfacial environment of NCM through early surface interaction and partial coverage, reducing the accessibility of residual monomers to the cathode interface. The formation protocol then promotes preferential TFPP decomposition before extensive monomer oxidation, enabling a protective CEI with a LiF‐rich inner region. This sequential interfacial regulation suppresses monomer‐driven side reactions, reduces electrolyte consumption, stabilizes Li‐ion transport, and mitigates structural degradation of the cathode. Consequently, a 2 Ah‐level pouch cell delivering 303 Wh kg −1 retained 82.8% capacity after 150 cycles under lean electrolyte conditions (2 g Ah −1 ). This work thus provides a practical strategy for developing more durable high‐energy‐density GPE‐based batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical and Biomolecular Engineering, Yonsei University, Seodaemun-gu, Seoul, Republic of Korea.
- Next Generation Battery Office, SK On, Yuseong-gu, Daejeon, Republic of Korea.
ORCID-Profile: Sang Goo Kang, Jaehoon Choi, Jong Hyeok Park
Förderung
- Ministry of Trade, Industry & Energy (MOTIE, Korea)
- Ministry of Education (MOE) and the Seoul Metropolitan Government
Zitieren
APA
Kang, S. G., Ko, J., Kim, G., Choi, J., & Park, J. H. (2026). Mechanistic Control of Cathode–Electrolyte Interphase Formation in Gel Polymer Electrolyte for Lithium‐Ion Batteries. Angewandte Chemie International Edition, 65(46). https://doi.org/10.1002/anie.1297472
Vancouver
Kang SG, Ko J, Kim G, Choi J, Park JH. Mechanistic Control of Cathode–Electrolyte Interphase Formation in Gel Polymer Electrolyte for Lithium‐Ion Batteries. Angewandte Chemie International Edition. 2026;65(46). doi:10.1002/anie.1297472
BibTeX
@article{Kang2026,
author = {Kang, Sang Goo and Ko, Jeonghyun and Kim, Gunyoung and Choi, Jaehoon and Park, Jong Hyeok},
title = {Mechanistic Control of Cathode–Electrolyte Interphase Formation in Gel Polymer Electrolyte for Lithium‐Ion Batteries},
journal = {Angewandte Chemie International Edition},
year = {2026},
volume = {65},
number = {46},
doi = {10.1002/anie.1297472}
}
EUVIMED