EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A High‐Performance Garnet‐Based All‐Solid‐State Battery Fabricated Through Room‐Temperature Ultrasonic Welding

Tianlu Pang, Shufen Wu, Han Wu, Xiaobao Li, Yande Li, LiTao Yu, Hui Zhang, Yong Han, Zhi Guo, Nian Zhang iD

Advanced Science · 2025-09 · 12 (36)

DOI: 10.1002/advs.202504388 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 24.06.2025. Verfasst von Tianlu Pang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Shanghai Synchrotron Radiation Facility, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, 201204, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Garnet‐type Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 (LLZO) has emerged as a highly promising solid electrolyte for next‐generation Li metal batteries due to its high Li + conductivity and stability against metallic lithium. However, its practical application is hindered by poor interfacial contact between Li and LLZO, as well as the persistent issue of lithium dendrite formation during cycling. In this study, a novel and efficient strategy is proposed to address these challenges by employing a room‐temperature ultrasonic treatment combined with a LiMg alloy anode. The fabricated symmetrical UW‐LiMg/LLZO/UW‐LiMg cell exhibits a low interfacial resistance and achieves an unprecedented critical current density of 4.45 mA cm −2 . Furthermore, these cells demonstrate excellent cycling stability, maintaining stable lithium plating/stripping for over 1000 h at a high current density of 1 mA cm − 2 with a low overpotential of ≈30 mV. The superior performance is attributed to the enhanced anode ductility achieved through Mg alloying and the formation of an ultra‐stable interface layer. The all‐solid‐state UW‐LiMg/LLZO/LiFePO 4 battery, incorporating an ultrasonically treated alloy anode and a fluorinated cathode interface, delivers a specific capacity of 153 mAh g −1 at 0.5 C and retains an impressive capacity retention of 90% after 200 cycles at room temperature.

Schlagwörter

Stichwörter der Autor:innen

LiMg alloygarnet electrolytehigh critical current densityinterfaceultrasound solid welding

Autor:innen und Institutionen

  • Shanghai Synchrotron Radiation Facility, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, 201204, China.
  • State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai, 200050, China.
  • Eastern Institute for Advanced Study, Ningbo Key Laboratory of All-Solid-State Battery, Zhejiang Key Laboratory of All-Solid-State Battery, Eastern Institute of Technology Ningbo, Zhejiang, 315200, China.
  • Center for Transformative Science, ShanghaiTech University, Shanghai, 201210, China.

ORCID-Profile: Nian Zhang

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Pang, T., Wu, S., Wu, H., Li, X., Li, Y., Yu, L., Zhang, H., Han, Y., Guo, Z., & Zhang, N. (2025). A High‐Performance Garnet‐Based All‐Solid‐State Battery Fabricated Through Room‐Temperature Ultrasonic Welding. Advanced Science, 12(36). https://doi.org/10.1002/advs.202504388

Vancouver

Pang T, Wu S, Wu H, Li X, Li Y, Yu L, et al. A High‐Performance Garnet‐Based All‐Solid‐State Battery Fabricated Through Room‐Temperature Ultrasonic Welding. Advanced Science. 2025;12(36). doi:10.1002/advs.202504388

BibTeX
@article{Pang2025,
  author = {Pang, Tianlu and Wu, Shufen and Wu, Han and Li, Xiaobao and Li, Yande and Yu, LiTao and Zhang, Hui and Han, Yong and Guo, Zhi and Zhang, Nian},
  title = {A High‐Performance Garnet‐Based All‐Solid‐State Battery Fabricated Through Room‐Temperature Ultrasonic Welding},
  journal = {Advanced Science},
  year = {2025},
  volume = {12},
  number = {36},
  doi = {10.1002/advs.202504388}
}
Kostenlos starten →