All‐Solid‐State Battery Fabricated by 3D Aerosol Jet Printing
Advanced Engineering Materials · 2024-02 · 26 (4)
DOI: 10.1002/adem.202300953 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 28.09.2023. Verfasst von Raymond Lopez-Hallman und 7 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Air Force Research Laboratory.
Abstract (Originalsprache)
All‐solid‐state battery (ASSB) technology has emerged as a promising solution for developing safe and high‐energy‐density power sources. However, the pronounced interfacial charge transfer resistance between the electrode and the solid electrolyte continues to be a central obstacle in contemporary ASSBs. This work demonstrates the first approach to printing ASSBs using aerosol jet printing technology. A composite cathode, composed of active materials, binder polymer, and conductive filler, is printed onto the current collector. Subsequently, a solventless superionic conducting solid polymer electrolyte is printed on the cathode to form a seamless interface between the electrode and the electrolyte, resulting in a 3D‐printed all‐solid‐state lithium‐ion battery. The active material in the cathode (lithium iron phosphate, LFP) achieves a loading of ≈10 mg cm −2 , while the solid polymer electrolyte layer maintains a thickness of a mere 24 μm. Under ambient conditions (30 °C), the half‐cell ASSB exhibits a specific capacity of over 130 mAh g −1 at 0.05 C. Advanced aerosol printed cells with a porous membrane, which allows the batteries to be safely cycled at higher temperature (60 °C), exhibit fast charging/discharging rates. These batteries are capable of cycling at a 0.3 C rate, delivering a specific capacity surpassing 160 mAh g −1 .
Förderung
- Air Force Research Laboratory
Zitieren
APA
Lopez-Hallman, R., Rodriguez, R., Lai, Y., Zhang, Q., Tsao, B., Deiner, J., Fellner, J. P., & Zhu, Y. (2024). All‐Solid‐State Battery Fabricated by 3D Aerosol Jet Printing. Advanced Engineering Materials, 26(4). https://doi.org/10.1002/adem.202300953
Vancouver
Lopez-Hallman R, Rodriguez R, Lai Y, Zhang Q, Tsao B, Deiner J, et al. All‐Solid‐State Battery Fabricated by 3D Aerosol Jet Printing. Advanced Engineering Materials. 2024;26(4). doi:10.1002/adem.202300953
BibTeX
@article{LopezHallman2024,
author = {Lopez-Hallman, Raymond and Rodriguez, Rodrigo and Lai, Yueh-Ting and Zhang, Qiuhong and Tsao, Bang-Hung and Deiner, Jay and Fellner, Joseph P. and Zhu, Yu},
title = {All‐Solid‐State Battery Fabricated by 3D Aerosol Jet Printing},
journal = {Advanced Engineering Materials},
year = {2024},
volume = {26},
number = {4},
doi = {10.1002/adem.202300953}
}
EUVIMED