Pad‐Printed Electronic Circuits on PEEK Substrates: Toward 3D Printed Electronics on High‐Performance Polymers
Advanced Materials Technologies · 2026-11-19
DOI: 10.1002/admt.71488 ↗At a glance
Journal article in Advanced Materials Technologies, published online on 2026-11-19. Written by Adrien Sagnimorte and 6 co-authors. 33 references. The full text is freely available (open access, CC BY 4.0).
Abstract (original language)
Poly(ether ether ketone) (PEEK) is a high‐performance thermoplastic suitable for advanced electronic applications due to its mechanical, thermal, and chemical properties. However, the direct manufacturing of conductive patterns on PEEK remains challenging because of its low surface energy and limited adhesion. This work investigates a pad‐printing approach for integrating electronic circuits on 2D and 3D PEEK substrates. A silver‐based conductive ink is characterized for thermal stability, viscosity, and surface tension to assess its suitability for pad printing on PEEK. The influence of the number of superimposed printing strokes on morphology, print quality, and electrical performance is evaluated. Two superimposed printing strokes provide optimal conductive pattern formation, achieving a resistivity of 136 ± 68 µΩ·cm after thermal curing at 120°C and 26 ± 4 µΩ·cm at 200°C. Photonic curing reduces resistivity to 17 ± 4 µΩ·cm. Adhesion and shear strength are assessed through dedicated tests, while electrical stability is evaluated under prolonged thermal aging at 250°C and repeated bending, demonstrating reliable integration on PEEK substrates. Functional 2D and 3D electronic demonstrators confirm the capability of the process to produce conformal conductive circuits. This approach enables the development of lightweight, multifunctional, and high‐temperature electronic systems based on PEEK substrates.
Cite
APA
Sagnimorte, A., krosnicki, G., Lombard, P., Charmeau, J., Cabrera, M., Allard, B., & Gerges, T. (2026). Pad‐Printed Electronic Circuits on PEEK Substrates: Toward 3D Printed Electronics on High‐Performance Polymers. Advanced Materials Technologies. https://doi.org/10.1002/admt.71488
Vancouver
Sagnimorte A, krosnicki G, Lombard P, Charmeau J, Cabrera M, Allard B, et al. Pad‐Printed Electronic Circuits on PEEK Substrates: Toward 3D Printed Electronics on High‐Performance Polymers. Advanced Materials Technologies. 2026. doi:10.1002/admt.71488
BibTeX
@article{Sagnimorte2026,
author = {Sagnimorte, Adrien and krosnicki, Guillaume and Lombard, Philippe and Charmeau, Jean‐Yves and Cabrera, Michel and Allard, Bruno and Gerges, Tony},
title = {Pad‐Printed Electronic Circuits on PEEK Substrates: Toward 3D Printed Electronics on High‐Performance Polymers},
journal = {Advanced Materials Technologies},
year = {2026},
doi = {10.1002/admt.71488}
}
EUVIMED