EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Toward an Internet of Things Circular Economy Using Printed Circuits on Reusable Steel Substrates

Jeff Kettle, Rudra Mukherjee, Shoushou Zhang, Tianwei Zhang, Jonathan Harwell, Andrew Bainbridge, Mahmoud Wagih, Ana Martinez Diez, MariFe Menendez Suarez, Pascal Sanchez

Advanced Electronic Materials · 2025-04 · 11 (5)

DOI: 10.1002/aelm.202400529 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 30.03.2025. Verfasst von Jeff Kettle und 9 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

There is a pressing need to reduce electronic waste, which along with government edicts and national time‐bound policy directives are shaping the drive toward circular economy solutions in electronics. However, there is no industrially standardized approach for fabricating high‐throughput recyclable and reusable electronic assemblies. Herein, we present the functionalization of steel over large areas with low‐cost insulative intermediate layers as Printed Circuit Boards (PCBs), enabling an electronics circular economy. Roll‐to‐roll‐friendly reusable steel substrates are coated using Sol–gel‐based low‐roughness insulative layers, with conductive tracks and solder pads additively manufactured with direct‐write printing. To demonstrate how degradable 3D scaffolds could enable wireless applications, RF components, and wi‐fi nodes are demonstrated with 3D‐printed antennas showing the feasibility of broadband Internet of Things applications up to 6 GHz. At their end‐of‐life, the steel‐based PCBs are sonicated in non‐hazardous solvents allowing for the rapid recovery of components and precious metals. The environmental benefits of our approach are discussed using Life Cycle Assessments (LCA) and a comparative LCA between these scenarios has been undertaken. Consideration of the final product cost is given and potential business models to enter the electronics market are identified.

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Kettle, J., Mukherjee, R., Zhang, S., Zhang, T., Harwell, J., Bainbridge, A., Wagih, M., Diez, A. M., Suarez, M. M., & Sanchez, P. (2025). Toward an Internet of Things Circular Economy Using Printed Circuits on Reusable Steel Substrates. Advanced Electronic Materials, 11(5). https://doi.org/10.1002/aelm.202400529

Vancouver

Kettle J, Mukherjee R, Zhang S, Zhang T, Harwell J, Bainbridge A, et al. Toward an Internet of Things Circular Economy Using Printed Circuits on Reusable Steel Substrates. Advanced Electronic Materials. 2025;11(5). doi:10.1002/aelm.202400529

BibTeX
@article{Kettle2025,
  author = {Kettle, Jeff and Mukherjee, Rudra and Zhang, Shoushou and Zhang, Tianwei and Harwell, Jonathan and Bainbridge, Andrew and Wagih, Mahmoud and Diez, Ana Martinez and Suarez, MariFe Menendez and Sanchez, Pascal},
  title = {Toward an Internet of Things Circular Economy Using Printed Circuits on Reusable Steel Substrates},
  journal = {Advanced Electronic Materials},
  year = {2025},
  volume = {11},
  number = {5},
  doi = {10.1002/aelm.202400529}
}
Kostenlos starten →