EUVIMEDEUVIMED entdecken
Crossref

Flexible Thermoelectric Generator Based on Dip‐Coated SWCNT/PEDOT:PSS Composite Films for High Power Generation

Mohammed Nazibul Hasan, Mohamed Sultan Mohamed Ali, Laveet Kumar, Asan G.A. Muthalif, Herlina Abdul Rahim, Pei Ling Leow

Advanced Materials Technologies · 2026-07 · 11 (14)

DOI: 10.1002/admt.71000 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 21.04.2026. Verfasst von Mohammed Nazibul Hasan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Single‐walled carbon nanotube (SWCNT) films hold great promise for advancing flexible thermoelectric generators. However, achieving a high power factor for the films as well as device output power remains challenging. Herein, a scalable dip‐coating strategy to fabricate vacuum‐filtered SWCNT films conformally coated with poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is reported. This approach enhances interfacial charge transport and enables precise control over the SWCNT film coating. By optimizing the coating duration, the SWCNT/PEDOT:PSS composite films achieved a power factor of ∼340 µW/mK 2 near room temperature. These values exceed those of pristine SWCNT films by ∼30% and outperform most previously reported films prepared via direct mixing or drop‐casting. To demonstrate practical applicability, five pairs of SWCNT/PEDOT:PSS composite films were integrated onto an Ecoflex substrate to fabricate a flexible thermoelectric generator. The device provided a power density of ∼0.32 µW/cm 2 at a 30 K temperature gradient with stable performance over repeated cycles. The combination of scalability, low‐cost processing, and improved thermoelectric performance highlights dip‐coating as a compelling and versatile route for the development of next‐generation SWCNT‐based flexible thermoelectric generators.

Zitieren

APA

Hasan, M. N., Ali, M. S. M., Kumar, L., Muthalif, A. G., Rahim, H. A., & Leow, P. L. (2026). Flexible Thermoelectric Generator Based on Dip‐Coated SWCNT/PEDOT:PSS Composite Films for High Power Generation. Advanced Materials Technologies, 11(14). https://doi.org/10.1002/admt.71000

Vancouver

Hasan MN, Ali MSM, Kumar L, Muthalif AG, Rahim HA, Leow PL. Flexible Thermoelectric Generator Based on Dip‐Coated SWCNT/PEDOT:PSS Composite Films for High Power Generation. Advanced Materials Technologies. 2026;11(14). doi:10.1002/admt.71000

BibTeX
@article{Hasan2026,
  author = {Hasan, Mohammed Nazibul and Ali, Mohamed Sultan Mohamed and Kumar, Laveet and Muthalif, Asan G.A. and Rahim, Herlina Abdul and Leow, Pei Ling},
  title = {Flexible Thermoelectric Generator Based on Dip‐Coated SWCNT/PEDOT:PSS Composite Films for High Power Generation},
  journal = {Advanced Materials Technologies},
  year = {2026},
  volume = {11},
  number = {14},
  doi = {10.1002/admt.71000}
}
Kostenlos starten →