Wet Spun Composite Fiber with an Ordered Arrangement of PEDOT:PSS‐Coated Te Nanowires for High‐Performance Wearable Thermoelectric Generator
Advanced Functional Materials · 2024-10 · 34 (41)
DOI: 10.1002/adfm.202404195 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 07.05.2024. Verfasst von Jiajia Li und 13 weiteren Autor:innen. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Thermoelectric (TE) fibers are more suitable than films for portable or wearable devices. Herein, 2–3 nm thick poly (3,4‐ethylenedioxythiophene): poly (styrenesulfonate) (PEDOT:PSS) layer‐coated tellurium nanowires (PC‐Te NWs) are in situ prepared by a hydrothermal method. Then a series of PEDOT: PSS/PC‐Te NWs composite fibers are prepared by wet spinning and post‐treatment. The nanolayer prevents the agglomeration of the Te NWs and makes the NWs and PEDOT:PSS matrix have good compatibility, which results in the PC‐Te NWs content to a high value of 70 wt% and the fibers still with flexibility. The high aspect ratio of the PC‐Te NWs and the stress from the inner wall of the needle during spinning make the NWs ordered align along the composite fiber. Due to the large content and orientational arrangement of the PC‐Te NWs, as well as effective post‐treatment, an optimized composite fiber shows a power factor of 385.4 µW m −1 K −2 at 300 K, which is ≈4.9 times as high as the highest value of previously reported PEDOT:PSS/Te NWs‐based composite fibers. In addition, the composite fiber has good flexibility. The flexible TE generators assembled have excellent output performance. This work provides an effective strategy for the preparation of high‐performance flexible TE composite fibers.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, J., Wang, J., Yang, X., Dong, G., Liu, Y., Wang, Z., Zhang, M., Zuo, X., Han, X., Wu, C., Zhang, T., Liu, R., Cai, K., & Chen, L. (2024). Wet Spun Composite Fiber with an Ordered Arrangement of PEDOT:PSS‐Coated Te Nanowires for High‐Performance Wearable Thermoelectric Generator. Advanced Functional Materials, 34(41). https://doi.org/10.1002/adfm.202404195
Vancouver
Li J, Wang J, Yang X, Dong G, Liu Y, Wang Z, et al. Wet Spun Composite Fiber with an Ordered Arrangement of PEDOT:PSS‐Coated Te Nanowires for High‐Performance Wearable Thermoelectric Generator. Advanced Functional Materials. 2024;34(41). doi:10.1002/adfm.202404195
BibTeX
@article{Li2024,
author = {Li, Jiajia and Wang, Junhui and Yang, Xiao and Dong, Guoying and Liu, Ying and Wang, Zixing and Zhang, Mingcheng and Zuo, Xinru and Han, Xiaowen and Wu, Changxuan and Zhang, Ting and Liu, Ruiheng and Cai, Kefeng and Chen, Lidong},
title = {Wet Spun Composite Fiber with an Ordered Arrangement of PEDOT:PSS‐Coated Te Nanowires for High‐Performance Wearable Thermoelectric Generator},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {41},
doi = {10.1002/adfm.202404195}
}
EUVIMED