EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Performance Comparison of Shape Memory Polymer Structures Printed by Fused Deposition Modeling and Melt Electrowriting

Biranche Tandon, Nasim Sabahi, Reza Farsi, Taavet Kangur, Giovanni Boero, Arnaud Bertsch, Xiaopeng Li, Juergen Brugger

Advanced Materials Technologies · 2025-02 · 10 (4)

DOI: 10.1002/admt.202400466 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 04.09.2024. Verfasst von Biranche Tandon und 7 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: HORIZON EUROPE European Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused deposition modeling (FDM) and melt electrowriting (MEW) are techniques that use polymer fibers as building blocks for printing complex 3D structures, with fibers at the macroscopic and micrometer scale. Here, FDM and MEW are used to produce fibers of shape memory polymer at two different scales, and compare the performance of these fibers, in terms of shape fixity, shape recovery, and self‐healing properties. FDM and MEW are used for 4D printing of a shape memory polymer blend of thermoplastic poly( ε ‐caprolactone) (30% by wt.) and a soft thermoplastic elastomer polyurethane (70% by wt.) at two different scales. The shape transformation from a programmed temporary state to the printed permanent shape in response to temperature as the stimuli imparts the 4D aspect to the printing. The mean fiber diameter of shape memory polymer produced by FDM and MEW is 340 and 40 µm, respectively. The manufactured fibers show an excellent shape fixity ratio (≈95%) and shape recovery properties (>84%). MEW fibers show a 1.5x faster recovery rate than FDM fibers due to the scaling effect. The excellent shape memory properties are complemented by self‐healing characteristics in the printed fibers. Additionally, MEW of a shape memory polymer is directly performed on a cylindrical collector to obtain tubular constructs which can potentially be used as stents for coronary or vascular applications.

Förderung

  • HORIZON EUROPE European Research Council

Zitieren

APA

Tandon, B., Sabahi, N., Farsi, R., Kangur, T., Boero, G., Bertsch, A., Li, X., & Brugger, J. (2025). Performance Comparison of Shape Memory Polymer Structures Printed by Fused Deposition Modeling and Melt Electrowriting. Advanced Materials Technologies, 10(4). https://doi.org/10.1002/admt.202400466

Vancouver

Tandon B, Sabahi N, Farsi R, Kangur T, Boero G, Bertsch A, et al. Performance Comparison of Shape Memory Polymer Structures Printed by Fused Deposition Modeling and Melt Electrowriting. Advanced Materials Technologies. 2025;10(4). doi:10.1002/admt.202400466

BibTeX
@article{Tandon2025,
  author = {Tandon, Biranche and Sabahi, Nasim and Farsi, Reza and Kangur, Taavet and Boero, Giovanni and Bertsch, Arnaud and Li, Xiaopeng and Brugger, Juergen},
  title = {Performance Comparison of Shape Memory Polymer Structures Printed by Fused Deposition Modeling and Melt Electrowriting},
  journal = {Advanced Materials Technologies},
  year = {2025},
  volume = {10},
  number = {4},
  doi = {10.1002/admt.202400466}
}
Kostenlos starten →