4D Fabrication of Two‐Way Shape Memory Polymeric Composites by Electrospinning and Melt Electrowriting
Macromolecular Rapid Communications · 2024-06 · 45 (11)
DOI: 10.1002/marc.202400010 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, online erschienen am 15.03.2024. Verfasst von Chiara Pasini und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Industrial Engineering, University of Brescia, via Branze 38, Brescia, 25123, Italy. Hauptthemen laut MEDLINE: Polymers, Nanofibers. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fraunhofer Cluster of Excellence Programmable Materials, European Regional Development Fund, Deutsche Forschungsgemeinschaft.
Abstract (Originalsprache)
This work presents a new method for 4D fabrication of two‐way shape memory materials that are capable of reversible shapeshifting right after manufacturing, upon application of proper heating and cooling cycles. The innovative solution presented here consists in the combination of highly stretched electrospun shape memory polymer (SMP) nanofibers with a melt electrowritten elastomer. More specifically, the stretched nanofibers are made of a biocompatible thermoplastic polyurethane (TPU) with crystallizable soft segments, undergoing melt‐induced contraction and crystallization‐induced elongation upon heating and cooling, respectively. Reversible actuation during crystallization becomes possible due to the elastic recovery of the elastomer component, obtained by melt electrowriting of a commercial TPU filament. Thanks to the design freedom offered by additive manufacturing, the elastomer structure also has the role of guiding the shape transformation. Electrospinning and melt electrowriting process parameters are set up so to obtain smart 4D objects capable of two‐way shape memory effect (SME), and the possibility of reversible and repeatable actuation is demonstrated. The two components are then combined in different proportions with the aim of tailoring the two‐way SME, taking into account the effect of design parameters such as the SMP content, the elastomer pattern, and the composite thickness.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Mechanical and Industrial Engineering, University of Brescia, via Branze 38, Brescia, 25123, Italy.
- Faculty of Engineering Sciences, University of Bayreuth, Ludwig Thoma Str. 36A, 95447, Bayreuth, Germany.
- Shape Memory Polymers Group, Fraunhofer Institute for Applied Polymer Research IAP, Geiselbergstr. 69, 14476, Potsdam, Germany.
- Bavarian Polymer Institute, University of Bayreuth, 95447, Bayreuth, Germany.
ORCID-Profile: Chiara Pasini, Zhander Vohr Soreño, Thorsten Pretsch, Gissela Constante, Ilia Sadilov, Leonid Ionov
Förderung
- Fraunhofer Cluster of Excellence Programmable Materials
- European Regional Development Fund
- Deutsche Forschungsgemeinschaft
Zitieren
APA
Pasini, C., Soreño, Z. V., Schönfeld, D., Pretsch, T., Constante, G., Sadilov, I., & Ionov, L. (2024). 4D Fabrication of Two‐Way Shape Memory Polymeric Composites by Electrospinning and Melt Electrowriting. Macromolecular Rapid Communications, 45(11). https://doi.org/10.1002/marc.202400010
Vancouver
Pasini C, Soreño ZV, Schönfeld D, Pretsch T, Constante G, Sadilov I, et al. 4D Fabrication of Two‐Way Shape Memory Polymeric Composites by Electrospinning and Melt Electrowriting. Macromolecular Rapid Communications. 2024;45(11). doi:10.1002/marc.202400010
BibTeX
@article{Pasini2024,
author = {Pasini, Chiara and Soreño, Zhander Vohr and Schönfeld, Dennis and Pretsch, Thorsten and Constante, Gissela and Sadilov, Ilia and Ionov, Leonid},
title = {4D Fabrication of Two‐Way Shape Memory Polymeric Composites by Electrospinning and Melt Electrowriting},
journal = {Macromolecular Rapid Communications},
year = {2024},
volume = {45},
number = {11},
doi = {10.1002/marc.202400010}
}
EUVIMED