EUVIMEDEUVIMED entdecken
Open Access

Performance of Fused Deposition Modeling 3D Printed Fabric with Different Structures

Yui-Yiu Wong, Chu-Po Ho, Chi-Wai Kan iD

3D Printing and Additive Manufacturing · 01.08.2025 · 12 (4) · 365-372

DOI: 10.1089/3dp.2023.0254 ↗

Kurz gefasst

Fachartikel in der Zeitschrift 3D Printing and Additive Manufacturing, online erschienen am 16.08.2025. Verfasst von Yui-Yiu Wong und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Fashion and Textiles, The Hong Kong Polytechnic University, Kowloon, Hong Kong. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D printed fashion products have become a trend. This article explains use of fused deposition modeling technology for 3D printing of fabrics with thermoplastic polyurethane flexible filament. A total of 15 structures of fabric were designed and printed for fabric performance tests. The fabric structures were “woven-like.” Those fabrics were printed by 0.8, 1.0, and 1.5 mm nozzles, separately. Meanwhile, the fabrics had various layer heights, but total thickness of the fabric was fixed at 0.6 mm. The strongest fabric could resist up to 460 N in ball burst test. In tensile test, the strongest fabric was broken at 230 N and maximum elongation was 647% at break. Besides, the failure performance was analyzed, recovery ability of fabric was also evaluated. The least deformation of the fabric was 2.5% after stretching with 60 N and releasing for five cycles. These results of the fabric performance could be a database and a reference for designing the structure of an apparel or a garment.

Schlagwörter

Stichwörter der Autor:innen

3D printed fabric3D printed fashion3D printed textilefabric performance

Autor:innen und Institutionen

  • School of Fashion and Textiles, The Hong Kong Polytechnic University, Kowloon, Hong Kong.

ORCID-Profile: Chi-Wai Kan

Zitieren

APA

Wong, Y. Y., Ho, C. P., & Kan, C. W. (2025). Performance of Fused Deposition Modeling 3D Printed Fabric with Different Structures. 3D Printing and Additive Manufacturing, 12(4), 365-372. https://doi.org/10.1089/3dp.2023.0254

Vancouver

Wong YY, Ho CP, Kan CW. Performance of Fused Deposition Modeling 3D Printed Fabric with Different Structures. 3D Printing and Additive Manufacturing. 2025;12(4):365-372. doi:10.1089/3dp.2023.0254

BibTeX
@article{Wong2025,
  author = {Wong, Yui-Yiu and Ho, Chu-Po and Kan, Chi-Wai},
  title = {Performance of Fused Deposition Modeling 3D Printed Fabric with Different Structures},
  journal = {3D Printing and Additive Manufacturing},
  year = {2025},
  volume = {12},
  number = {4},
  pages = {365--372},
  doi = {10.1089/3dp.2023.0254}
}
Kostenlos starten →