Solid Polymer Electrolyte with Compatible Cathode‐Electrolyte Interfacial Design Enabling Lithium Metal Batteries Operation at 4.8 V with Long Cycle Life
Advanced Materials · 2025-05 · 37 (19)
DOI: 10.1002/adma.202501659 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 27.03.2025. Verfasst von Jiajia Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: Energy Engineering, Division of Energy Science, Luleå University of Technology, Luleå, 97187, Sweden. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Swedish Energy Agency and STINT, National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province.
Abstract (Originalsprache)
Lithium metal batteries (LMBs) with solid polymer electrolytes (SPEs) offer higher energy density and enhance safety compared to the Li‐ion batteries that use a graphite anode and organic electrolytes. However, achieving long cycle life for LMBs while enabling the use of high‐voltage cathodes required the compatibility between cathode‐SPE, rather than focusing solely on the individual components. This study presente a dual‐functional poly(ionic liquid) (PolyIL)‐based material that simultaneously serves as an SPE matrix and a cathode binder, constructing a cathode‐SPE interface with exceptional (electro)chemical compatibility owing to the high ionic conductivity and wide electrochemical stability window. Additionally, a modified cellulose acetate (CA)‐based PolyIL substrate, enriched with C═O and ─OH groups, is designed rationally and incorporated to assist the Li + migration, leveraging their highly negative charge, and enhancing the mechanical strength of the SPE. Furthermore, an in situ polymerization approach is employed to assemble the cells, improving the physical compatibility at the cathode‐SPE interface. As a result, the Li||LFP cell demonstrate stable cycling beyond 1100 cycles, and the Li||NCM811 cell reliably operates at a high cut‐off voltage of up to 4.8 V.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Energy Engineering, Division of Energy Science, Luleå University of Technology, Luleå, 97187, Sweden.
- CAS Key Laboratory of Green Process and Engineering, Beijing Key Laboratory of Ionic Liquids Clean Process, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, P. R. China.
- Jiangsu Engineering Laboratory of Novel Functional Polymeric Materials, Jiangsu, Key Laboratory of Advanced Negative Carbon Technologies College of Chemistry, Suzhou Key Laboratory of Soft Material and New Energy, Colle…
- Talga Technologies Limited, Luleå, 972 35, Sweden.
- Longzihu New Energy Laboratory, Zhengzhou, Institute of Emerging Industrial Technology, Henan University, Longzihu New Energy Laboratory, School of Energy Science and Technology, Henan University, Zhengzhou, 450000, P.…
ORCID-Profile: Xiaoyan Ji
Förderung
- Swedish Energy Agency and STINT
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province
- National Science and Technology Major Project
- STINT
- HORIZON EUROPE European Innovation Ecosystems
- the Bio4Energy
- Swedish Foundation for International Cooperation in Research and Higher Education
Zitieren
APA
Li, J., Hu, H., Zhu, J., Ma, X., Hu, Y., Zhang, H., Liu, F., Zhang, S., & Ji, X. (2025). Solid Polymer Electrolyte with Compatible Cathode‐Electrolyte Interfacial Design Enabling Lithium Metal Batteries Operation at 4.8 V with Long Cycle Life. Advanced Materials, 37(19). https://doi.org/10.1002/adma.202501659
Vancouver
Li J, Hu H, Zhu J, Ma X, Hu Y, Zhang H, et al. Solid Polymer Electrolyte with Compatible Cathode‐Electrolyte Interfacial Design Enabling Lithium Metal Batteries Operation at 4.8 V with Long Cycle Life. Advanced Materials. 2025;37(19). doi:10.1002/adma.202501659
BibTeX
@article{Li2025,
author = {Li, Jiajia and Hu, Haiman and Zhu, Jiufu and Ma, Xinyu and Hu, Yin and Zhang, Haitao and Liu, Fengming and Zhang, Suojiang and Ji, Xiaoyan},
title = {Solid Polymer Electrolyte with Compatible Cathode‐Electrolyte Interfacial Design Enabling Lithium Metal Batteries Operation at 4.8 V with Long Cycle Life},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {19},
doi = {10.1002/adma.202501659}
}
EUVIMED