Enabling Scalable Polymer Electrolyte with Dual‐Reinforced Stable Interface for 4.5 V Lithium‐Metal Batteries
Advanced Materials · 2023-11 · 35 (45)
DOI: 10.1002/adma.202304951 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 09.10.2023. Verfasst von Shengguang Qi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory of Fuel Cell Technology, School of Chemistry and Chemical Engineering, South China University of Technology, Guan…. Die Arbeit wurde bisher 128-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation for Distinguished Young Scholar, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Hitherto, it remains a great challenge to stabilize electrolyte–electrode interfaces and impede lithium dendrite proliferation in lithium‐metal batteries with high‐capacity nickel‐rich LiN x Co y Mn 1− x−y O 2 (NCM) layer cathodes. Herein, a special molecular‐level‐designed polymer electrolyte is prepared by the copolymerization of hexafluorobutyl acrylate and methylene bisacrylamide to construct dual‐reinforced stable interfaces. Verified by X‐ray photoelectron spectroscopy depth profiling, there are favorable solid electrolyte interphase (SEI) layers on Li metal anodes and robust cathode electrolyte interphase (CEI) on Ni‐rich cathodes. The SEI enriched in lithiophilic N−(C) 3 guides the homogenous distribution of Li + and facilitates the transport of Li + through LiF and Li 3 N, promoting uniform Li + plating and stripping. Moreover, the CEI with antioxidative amide groups can suppress the parasitic reactions between cathode and electrolyte and the structural degradation of cathode. Meanwhile, a unique two‐stage rheology‐tuning UV polymerization strategy is utilized, which is quite suited for continuous electrolyte fabrication with environmental friendliness. The fabricated polymer electrolyte exhibits a high ionic conductivity of 1.01 mS cm −1 at room temperature. 4.5 V NCM622//Li batteries achieve prolonged operation with a retention rate of 85.0% after 500 cycles at 0.5 C. This work provides new insights into molecular design and processibility design for polymer‐based high‐voltage batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangdong Provincial Key Laboratory of Fuel Cell Technology, School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, 510641, China.
- School of Materials Science and Engineering, South China University of Technology, Guangzhou, 510641, China.
ORCID-Profile: Shumei Liu, Li Du
Förderung
- National Natural Science Foundation of China
- Guangdong Basic and Applied Basic Research Foundation for Distinguished Young Scholar
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Qi, S., Li, M., Gao, Y., Zhang, W., Liu, S., Zhao, J., & Du, L. (2023). Enabling Scalable Polymer Electrolyte with Dual‐Reinforced Stable Interface for 4.5 V Lithium‐Metal Batteries. Advanced Materials, 35(45). https://doi.org/10.1002/adma.202304951
Vancouver
Qi S, Li M, Gao Y, Zhang W, Liu S, Zhao J, et al. Enabling Scalable Polymer Electrolyte with Dual‐Reinforced Stable Interface for 4.5 V Lithium‐Metal Batteries. Advanced Materials. 2023;35(45). doi:10.1002/adma.202304951
BibTeX
@article{Qi2023,
author = {Qi, Shengguang and Li, Mianrui and Gao, Yuqing and Zhang, Weifeng and Liu, Shumei and Zhao, Jianqing and Du, Li},
title = {Enabling Scalable Polymer Electrolyte with Dual‐Reinforced Stable Interface for 4.5 V Lithium‐Metal Batteries},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {45},
doi = {10.1002/adma.202304951}
}
EUVIMED