EUVIMEDEUVIMED entdecken
Crossref

3D Printed Titanium Scaffolds with Bi‐Directional Gradient QK‐Functionalized Surface

Xiaoyun Sun, Ru Zhong, Congcong Wu, Silin Ye, Haipeng Yuan, Zhou Fang, Junjian Chen, Delin Cheng, Lijing Hao, Lei Chu, Lin Wang iD

Advanced Materials · 2025-02 · 37 (8)

DOI: 10.1002/adma.202406421 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 15.01.2025. Verfasst von Xiaoyun Sun und 10 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Research Center for Tissue Restoration and Reconstruction, South China University of Technology, Guangzhou, 510006, China. Hauptthemen laut MEDLINE: Titanium, Printing, Three-Dimensional, Tissue Scaffolds. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: National Key R&D Program of China, Science and Technology Program of Guangzhou, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D printed titanium scaffold has promising applications in orthopedics. However, the bioinert titanium presents challenges for promoting vascularization and tissue growth within the porous scaffold for stable osteointegration. In this study, a modular porous titanium scaffold is created using 3D printing and a gradient‐surface strategy to immobilize QK peptide on the surface with a bi‐directional gradient distribution. This design featured high peptide density in the interior and low peptide density on both ends, aiming to induce cell migration from ends to interior and subsequently enhance vascularization and osteointegration within the scaffold. In vitro results showed that besides the inherent bioactivity, the gradient distribution of QK positively correlated with endothelial cell migration and promoted angiogenesis. In vivo assay was performed by a segmental bone defect model in rabbit and a spine repair model in sheep. Various staining and Micro‐CT results demonstrated that compared to that with uniformly QK‐functionalized surface, the scaffold with bi‐directional gradient QK‐functionalized surface (Ti‐G) significantly encouraged new tissue growth toward the interior of the scaffold, subsequently facilitated angiogenesis and osteointegration. This study provides an effective strategy for enhancing the bioactivity of peptide‐functionalized scaffolds through the concept of bi‐directional gradients, and holds potential for various 3D printed scaffolds.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumPrinting, Three-DimensionalTissue ScaffoldsAnimalsRabbitsPorosityHumansSurface PropertiesSheepHuman Umbilical Vein Endothelial CellsCell MovementNeovascularization, PhysiologicPeptidesTissue EngineeringBiocompatible Materials

Stichwörter der Autor:innen

3D printed scaffoldangiogenesisgradient surfaceosteointegrationtitanium

Substanzen

TitaniumPeptidesBiocompatible Materials

Autor:innen und Institutionen

  • National Engineering Research Center for Tissue Restoration and Reconstruction, South China University of Technology, Guangzhou, 510006, China.
  • School of Material Science and Engineering, South China University of Technology, Guangzhou, 510006, China.
  • Key Laboratory of Biomedical Engineering of Guangdong Province, South China University of Technology, Guangzhou, 510006, China.
  • Jinan Center for Disease Control and Prevention, Jinan, 250001, China.
  • Guangzhou Huare Medical Equipment Co., Ltd., Guangzhou, 511447, China.
  • Guangdong Institute of Advanced Biomaterials and Medical Devices, Guangzhou, 510000, China.

ORCID-Profile: Lin Wang

Förderung

  • National Key R&D Program of China
  • Science and Technology Program of Guangzhou
  • National Key Research and Development Program of China

Zitieren

APA

Sun, X., Zhong, R., Wu, C., Ye, S., Yuan, H., Fang, Z., Chen, J., Cheng, D., Hao, L., Chu, L., & Wang, L. (2025). 3D Printed Titanium Scaffolds with Bi‐Directional Gradient QK‐Functionalized Surface. Advanced Materials, 37(8). https://doi.org/10.1002/adma.202406421

Vancouver

Sun X, Zhong R, Wu C, Ye S, Yuan H, Fang Z, et al. 3D Printed Titanium Scaffolds with Bi‐Directional Gradient QK‐Functionalized Surface. Advanced Materials. 2025;37(8). doi:10.1002/adma.202406421

BibTeX
@article{Sun2025,
  author = {Sun, Xiaoyun and Zhong, Ru and Wu, Congcong and Ye, Silin and Yuan, Haipeng and Fang, Zhou and Chen, Junjian and Cheng, Delin and Hao, Lijing and Chu, Lei and Wang, Lin},
  title = {3D Printed Titanium Scaffolds with Bi‐Directional Gradient QK‐Functionalized Surface},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {8},
  doi = {10.1002/adma.202406421}
}
Kostenlos starten →