Enhanced osseointegration and antimicrobial properties of 3D-Printed porous titanium alloys with copper-strontium doped calcium silicate coatings
Journal of Biomaterials Applications · 2025
DOI: 10.1177/08853282241287916 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomaterials Applications, 2025. Verfasst von Xin Qi Cheng und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedics, The Affiliated Changzhou Second People's Hospital of Nanjing Medical University, Changzhou Medical Center, Nanjing Medica…. Hauptthemen laut MEDLINE: Titanium, Silicates, Osseointegration, Calcium Compounds. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: the Postgraduate Research& Practice Innovation Program of Jiangsu Province, and the Jiangsu Province Key Laboratory of Materials Surface Science and Technology, Changzhou Science and Technology Project Fund.
Abstract (Originalsprache)
The 3D printing of porous titanium scaffolds reduces the elastic modulus of titanium alloys and promotes osteogenic integration. However, due to the biological inertness of titanium alloy materials, the implant-bone tissue interface is weakly bonded. A calcium silicate (CS) coating doped with polymetallic ions can impart various biological properties to titanium alloy materials. In this study, CuO and SrO binary-doped CS coatings were prepared on the surface of 3D-printed porous titanium alloy scaffolds using atmospheric plasma spraying and characterized by SEM, EDS, and XRD. Both CuO and SrO were successfully incorporated into the CS coating. The in vivo osseointegration evaluation of the composite coating-modified 3D-printed porous titanium alloy scaffolds was conducted using a rabbit bone defect model, showing that the in vivo osseointegration of 2% CuO-10% SrO-CS-modified 3D-printed porous titanium alloy was improved. The in vitro antimicrobial properties of the 2% CuO-10% SrO-CS-modified 3D-printed porous titanium alloy were evaluated through bacterial platform coating, co-culture liquid absorbance detection, and crystal violet staining experiments, demonstrating that the composite coating exhibited good antimicrobial properties. In conclusion, the composite scaffold possesses both osteointegration-promoting and antimicrobial properties, indicating a broad potential for clinical applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Orthopaedics, The Affiliated Changzhou Second People's Hospital of Nanjing Medical University, Changzhou Medical Center, Nanjing Medical University, Changzhou, China.
- Department of Orthopedics, The Fifth People's Hospital of Ningxia, Shizuishan, China.
- Graduate School, Dalian Medical University, Dalian, China.
ORCID-Profile: Xin Qi Cheng
Förderung
- the Postgraduate Research& Practice Innovation Program of Jiangsu Province, and the Jiangsu Province Key Laboratory of Materials Surface Science and Technology
- Changzhou Science and Technology Project Fund
Zitieren
APA
Cheng, X. Q., Xu, W., Shao, L. H., Shen, H. Q., & Liu, H. W. (2025). Enhanced osseointegration and antimicrobial properties of 3D-Printed porous titanium alloys with copper-strontium doped calcium silicate coatings. Journal of Biomaterials Applications. https://doi.org/10.1177/08853282241287916
Vancouver
Cheng XQ, Xu W, Shao LH, Shen HQ, Liu HW. Enhanced osseointegration and antimicrobial properties of 3D-Printed porous titanium alloys with copper-strontium doped calcium silicate coatings. Journal of Biomaterials Applications. 2025. doi:10.1177/08853282241287916
BibTeX
@article{Cheng2025,
author = {Cheng, Xin Qi and Xu, Wei and Shao, Long Hui and Shen, Hua Qiao and Liu, Hong Wei},
title = {Enhanced osseointegration and antimicrobial properties of 3D-Printed porous titanium alloys with copper-strontium doped calcium silicate coatings},
journal = {Journal of Biomaterials Applications},
year = {2025},
doi = {10.1177/08853282241287916}
}
EUVIMED