EUVIMEDEUVIMED entdecken
Crossref

A 3D‐Printed Ferromagnetic Liquid Crystal Elastomer with Programmed Dual‐Anisotropy and Multi‐Responsiveness

Yuxuan Sun, Liu Wang iD, Zhengqing Zhu, Xingxiang Li, Hong Sun, Yong Zhao, Chenhui Peng, Ji Liu iD, Shiwu Zhang, Mujun Li

Advanced Materials · 2023-11 · 35 (45)

DOI: 10.1002/adma.202302824 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 21.09.2023. Verfasst von Yuxuan Sun und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei, 230026, P. R. China. Die Arbeit wurde bisher 98-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Natural Science Foundation of Anhui Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Liquid crystal elastomers (LCE) and magnetic soft materials are promising active materials in many emerging fields, such as soft robotics. Despite the high demand for developing active materials that combine the advantages of LCE and magnetic actuation, the lack of independent programming of the LCE nematic order and magnetization in a single material still hinders the desired multi‐responsiveness. In this study, a ferromagnetic LCE (magLCE) ink with nematic order and magnetization is developed that can be independently programmed to be anisotropic, referred to as “dual anisotropy”, via a customized 3D‐printing platform. The magLCE ink is fabricated by dispersing ferromagnetic microparticles in the LCE matrix, and a 3D‐printing platform is created by integrating a magnet with 3‐DoF motion into an extrusion‐based 3D printer. In addition to magnetic fields, magLCEs can also be actuated by heating sources (either environmental heating or photo‐heating of the embedded ferromagnetic microparticles) with a high energy density and tunable actuation temperature. A programmed magLCE strip robot is demonstrated with enhanced adaptability to complex environments (different terrains, magnetic fields, and temperatures) using a multi‐actuation strategy. The magLCE also has potential applications in mechanical memory, as demonstrated by the multistable mechanical metastructure array with remote writability and stable memory.

Schlagwörter

Stichwörter der Autor:innen

3D printinganisotropyferromagnetic materialsliquid crystal elastomersprogramming

Autor:innen und Institutionen

  • Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei, 230026, P. R. China.
  • CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui, 230026, P. R. China.
  • State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Science, 15 Beisihuan West Road, Beijing, 100190, P. R. China.
  • Department of Physics, University of Science and Technology of China, Hefei, Anhui, 230026, P. R. China.
  • Department of Mechanical and Energy Engineering, Southern University of Science and Technology of China, Shenzhen, 518055, P. R. China.
  • Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, 518055, P. R. China.

ORCID-Profile: Liu Wang, Ji Liu

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China
  • Natural Science Foundation of Anhui Province
  • Joint Funds from Hefei National Synchrotron Radiation Laboratory
  • Natural Science Foundation of Guangdong Province
  • Basic Research Program of Shenzhen
  • Scientific Research Platforms and Projects of the University of Guangdong Provincial Education Office
  • Science, Technology, and Innovation Commission of Shenzhen Municipality

Zitieren

APA

Sun, Y., Wang, L., Zhu, Z., Li, X., Sun, H., Zhao, Y., Peng, C., Liu, J., Zhang, S., & Li, M. (2023). A 3D‐Printed Ferromagnetic Liquid Crystal Elastomer with Programmed Dual‐Anisotropy and Multi‐Responsiveness. Advanced Materials, 35(45). https://doi.org/10.1002/adma.202302824

Vancouver

Sun Y, Wang L, Zhu Z, Li X, Sun H, Zhao Y, et al. A 3D‐Printed Ferromagnetic Liquid Crystal Elastomer with Programmed Dual‐Anisotropy and Multi‐Responsiveness. Advanced Materials. 2023;35(45). doi:10.1002/adma.202302824

BibTeX
@article{Sun2023,
  author = {Sun, Yuxuan and Wang, Liu and Zhu, Zhengqing and Li, Xingxiang and Sun, Hong and Zhao, Yong and Peng, Chenhui and Liu, Ji and Zhang, Shiwu and Li, Mujun},
  title = {A 3D‐Printed Ferromagnetic Liquid Crystal Elastomer with Programmed Dual‐Anisotropy and Multi‐Responsiveness},
  journal = {Advanced Materials},
  year = {2023},
  volume = {35},
  number = {45},
  doi = {10.1002/adma.202302824}
}
Kostenlos starten →