EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Liquid Crystal Elastomer Lattices with Thermally Programmable Deformation via Multi‐Material 3D Printing

Arda Kotikian, Audrey A Watkins, Giovanni Bordiga, Andrew Spielberg, Zoey S Davidson, Katia Bertoldi, Jennifer A Lewis iD

Advanced Materials · 2024-08 · 36 (34)

DOI: 10.1002/adma.202310743 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 15.01.2024. Verfasst von Arda Kotikian und 6 weiteren Autor:innen. Beteiligte Einrichtung: John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 02138, USA. Die Arbeit wurde bisher 85-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Science Foundation through the Harvard MRSEC, Army Research Office MURI program, National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An integrated design, modeling, and multi‐material 3D printing platform for fabricating liquid crystal elastomer (LCE) lattices in both homogeneous and heterogeneous layouts with spatially programmable nematic director order and local composition is reported. Depending on their compositional topology, these lattices exhibit different reversible shape‐morphing transformations upon cycling above and below their respective nematic‐to‐isotropic transition temperatures. Further, it is shown that there is good agreement between their experimentally observed deformation response and model predictions for all LCE lattice designs evaluated. Lastly, an inverse design model is established and the ability to print LCE lattices with the predicted deformation behavior is demonstrated. This work opens new avenues for creating architected LCE lattices that may find potential application in energy‐dissipating structures, microfluidic pumping, mechanical logic, and soft robotics.

Schlagwörter

Stichwörter der Autor:innen

active latticesadditive manufacturingliquid crystal elastomersshape‐morphing

Autor:innen und Institutionen

  • John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 02138, USA.
  • Wyss Institute for Biologically Inspired Engineering, Harvard University, Cambridge, MA, 02138, USA.

ORCID-Profile: Jennifer A Lewis

Förderung

  • National Science Foundation through the Harvard MRSEC
  • Army Research Office MURI program
  • National Science Foundation
  • Defense Advanced Research Projects Agency

Zitieren

APA

Kotikian, A., Watkins, A. A., Bordiga, G., Spielberg, A., Davidson, Z. S., Bertoldi, K., & Lewis, J. A. (2024). Liquid Crystal Elastomer Lattices with Thermally Programmable Deformation via Multi‐Material 3D Printing. Advanced Materials, 36(34). https://doi.org/10.1002/adma.202310743

Vancouver

Kotikian A, Watkins AA, Bordiga G, Spielberg A, Davidson ZS, Bertoldi K, et al. Liquid Crystal Elastomer Lattices with Thermally Programmable Deformation via Multi‐Material 3D Printing. Advanced Materials. 2024;36(34). doi:10.1002/adma.202310743

BibTeX
@article{Kotikian2024,
  author = {Kotikian, Arda and Watkins, Audrey A and Bordiga, Giovanni and Spielberg, Andrew and Davidson, Zoey S and Bertoldi, Katia and Lewis, Jennifer A},
  title = {Liquid Crystal Elastomer Lattices with Thermally Programmable Deformation via Multi‐Material 3D Printing},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {34},
  doi = {10.1002/adma.202310743}
}
Kostenlos starten →