Melt Electrowriting of Liquid Crystal Elastomer Scaffolds with Programmed Mechanical Response
Advanced Materials · 2023-04 · 35 (14)
DOI: 10.1002/adma.202209244 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 26.02.2023. Verfasst von Mehrzad Javadzadeh und 2 weiteren Autor:innen. Beteiligte Einrichtung: Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC-Universidad de Zaragoza, Departamento de Física de la Materia Condensada, Zaragoza, 5000…. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: European Union's Horizon 2020 Research and Innovation Programme, AEI/FEDER(UE) project, Spanish MINECO.
Abstract (Originalsprache)
Recently, significant advances have been achieved to precisely program the response of liquid crystal elastomers (LCEs) through extrusion‐based additive manufacturing techniques; however, important challenges remain, especially when well‐defined scaffolds based on ultrafine fibers are required. Here the melt electrowriting of reactive liquid crystalline inks, leading, after ultraviolet‐light‐induced crosslinking, to digitally positioned uniform LCE fibers with diameters ranging from hundreds of nanometers to tens of micrometers is presented, which is hardly accessible with conventional extrusion‐based printing techniques. The electrowriting process induces the preferential alignment of the mesogens parallel to the fiber's axis. Such an alignment, defined by the printing path, determines the mechanical response of the crosslinked material upon stimulation. This manufacturing platform allows the preparation of open square lattice scaffolds with ultrafine fibers (a few micrometers in diameter), periods as small as 90 µm, and well‐defined morphology. Additionally, the combination of accurate fiber stacking (up to 50 layers) and fiber fusion between layers leads to unprecedented microstructures composed of high‐aspect‐ratio LCE thin walls. The possibility of digitally controlling the printing of fibers allows the preparation complex fiber‐based scaffolds with programmed and reversible shape‐morphing, thus opening new avenues to prepare miniaturized actuators and smart structures for soft robotics and biomedical applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC-Universidad de Zaragoza, Departamento de Física de la Materia Condensada, Zaragoza, 50009, Spain.
- Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC-Universidad de Zaragoza, Departamento de Química Orgánica, Zaragoza, 50009, Spain.
- Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina, Instituto de Salud Carlos III, Zaragoza, 50018, Spain.
ORCID-Profile: Mehrzad Javadzadeh, Jesús Del Barrio, Carlos Sánchez-Somolinos
Förderung
- European Union's Horizon 2020 Research and Innovation Programme
- AEI/FEDER(UE) project
- Spanish MINECO
- Gobierno de Aragón project
- Fondo Social Europeo
- European Social Fund Investing in your future
- European Regional Development Fund
- CIBER -Consorcio Centro de Investigación Biomédica en Red-
Zitieren
APA
Javadzadeh, M., Del Barrio, J., & Sánchez-Somolinos, C. (2023). Melt Electrowriting of Liquid Crystal Elastomer Scaffolds with Programmed Mechanical Response. Advanced Materials, 35(14). https://doi.org/10.1002/adma.202209244
Vancouver
Javadzadeh M, Del Barrio J, Sánchez-Somolinos C. Melt Electrowriting of Liquid Crystal Elastomer Scaffolds with Programmed Mechanical Response. Advanced Materials. 2023;35(14). doi:10.1002/adma.202209244
BibTeX
@article{Javadzadeh2023,
author = {Javadzadeh, Mehrzad and Del Barrio, Jesús and Sánchez-Somolinos, Carlos},
title = {Melt Electrowriting of Liquid Crystal Elastomer Scaffolds with Programmed Mechanical Response},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {14},
doi = {10.1002/adma.202209244}
}
EUVIMED