EUVIMEDEUVIMED entdecken
Crossref

Ultrahigh Damping Efficiency in Laser Powder Bed Fusion Kelvin Metamaterials for Hysteretic Applications

Víctor Tuninetti, Josué Castro, Rodrigo Valle, Flavia Bustos, Enrico Saggionetto, César Garrido, Angelo Oñate, Alexis Salas, Carlos Lanziotti, Gonzalo Pincheira, Anne Mertens

Advanced Engineering Materials · 21.01.2026 · 28 (2)

DOI: 10.1002/adem.202502470 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 12.12.2025. Verfasst von Víctor Tuninetti und 10 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 44 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The burgeoning field of additive manufacturing has enabled the creation of mechanical metamaterials with unprecedented design freedom. This work presents an integrated experimental–numerical framework for characterizing the hysteretic behavior of a Kelvin‐type (truncated octahedron) lattice fabricated via laser powder bed fusion (LPBF) using 316L stainless steel. The objective is to assess its potential as a highly efficient energy‐dissipating device for structural applications. The hysteretic response is determined through a proportional incremental cyclic‐loading protocol and compared with a finite element‐based computational model. The model accurately captured the progressive decrease in effective stiffness and the corresponding increase in effective damping observed experimentally. The Kelvin lattice achieves exceptional damping efficiency, with effective damping values exceeding unity at large deformations. Custom shear fixtures produced via fused filament fabrication using polylactic acid provided precise, low‐cost testing supports for the LPBF specimens. The model also correctly identifies the specimen's failure location, confirming its predictive capability for future design optimization. Overall, this study demonstrates the feasibility of LPBF‐manufactured Kelvin structures as metallic dampers and establishes a reproducible, cost‐effective approach for testing and optimizing architected metamaterials for advanced energy‐dissipation applications.

Zitieren

APA

Tuninetti, V., Castro, J., Valle, R., Bustos, F., Saggionetto, E., Garrido, C., Oñate, A., Salas, A., Lanziotti, C., Pincheira, G., & Mertens, A. (2026). Ultrahigh Damping Efficiency in Laser Powder Bed Fusion Kelvin Metamaterials for Hysteretic Applications. Advanced Engineering Materials, 28(2). https://doi.org/10.1002/adem.202502470

Vancouver

Tuninetti V, Castro J, Valle R, Bustos F, Saggionetto E, Garrido C, et al. Ultrahigh Damping Efficiency in Laser Powder Bed Fusion Kelvin Metamaterials for Hysteretic Applications. Advanced Engineering Materials. 2026;28(2). doi:10.1002/adem.202502470

BibTeX
@article{Tuninetti2026,
  author = {Tuninetti, Víctor and Castro, Josué and Valle, Rodrigo and Bustos, Flavia and Saggionetto, Enrico and Garrido, César and Oñate, Angelo and Salas, Alexis and Lanziotti, Carlos and Pincheira, Gonzalo and Mertens, Anne},
  title = {Ultrahigh Damping Efficiency in Laser Powder Bed Fusion Kelvin Metamaterials for Hysteretic Applications},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {2},
  doi = {10.1002/adem.202502470}
}
Kostenlos starten →