Creep Characterization of Inconel 718 Lattice Metamaterials Manufactured by Laser Powder Bed Fusion
Advanced Engineering Materials · 2025-06 · 27 (11)
DOI: 10.1002/adem.202300643 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 12.09.2023. Verfasst von Akash Singh Bhuwal und 5 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Lattice metamaterials manufactured by laser powder bed fusion (LPBF) are limited by their performance for critical applications. LPBF materials have microstructural or macroscale anomalies, such as suboptimal grain size, morphology, and lack of fusion. This results in LPBF metamaterials performance degradation for various mechanical properties, such as creep, which has seldom been researched. To understand the creep behavior of LPBF Inconel 718, body‐centered cubic metamaterials are fabricated for creep test at 650 °C. Kachanov's damage modeling is used to predict the creep performance of the metamaterials under different loading conditions. Microstructural characterization is performed with scanning electron microscopy to identify critical microstructure defects affecting the failure mechanisms and creep behaviors of the metamaterials. It is shown in the results that the loading conditions affect the fracture process of the metamaterials owing to different failure mechanisms. In the simulation and test results, the logarithmic decline in creep life is shown when loading increases; also, logarithmic increase in the creep life is shown when relative density increases.
Zitieren
APA
Bhuwal, A. S., Pang, Y., Maskery, I., Ashcroft, I., Sun, W., & Liu, T. (2025). Creep Characterization of Inconel 718 Lattice Metamaterials Manufactured by Laser Powder Bed Fusion. Advanced Engineering Materials, 27(11). https://doi.org/10.1002/adem.202300643
Vancouver
Bhuwal AS, Pang Y, Maskery I, Ashcroft I, Sun W, Liu T. Creep Characterization of Inconel 718 Lattice Metamaterials Manufactured by Laser Powder Bed Fusion. Advanced Engineering Materials. 2025;27(11). doi:10.1002/adem.202300643
BibTeX
@article{Bhuwal2025,
author = {Bhuwal, Akash Singh and Pang, Yong and Maskery, Ian and Ashcroft, Ian and Sun, Wei and Liu, Tao},
title = {Creep Characterization of Inconel 718 Lattice Metamaterials Manufactured by Laser Powder Bed Fusion},
journal = {Advanced Engineering Materials},
year = {2025},
volume = {27},
number = {11},
doi = {10.1002/adem.202300643}
}
EUVIMED