Aluminum–Calcium Alloy for Laser Powder Bed Fusion
Journal of Manufacturing and Materials Processing · 26.04.2026 · 10 (5) · 148
DOI: 10.3390/jmmp10050148 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 26.04.2026. Verfasst von Nikolay V. Letyagin und 7 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation, Russian Science Foundation.
Abstract (Originalsprache)
Developing specialized aluminum alloys for additive processes is a strategic approach to achieve both strength and mass reduction in high-performance products. The prospects of the new metallic powder composition of Al3Ca2La2Mn0.4Zr alloy for laser powder bed fusion (LPBF) have been studied. It has been found that the best printing mode, providing a more than 99.0% density of the specimens, includes substrate heating to 150 °C and printing with a 350 W laser power, a 1500 mm/s printing speed, a 0.08 mm hatch distance and a 0.03 mm layer thickness (energy density 97.2 J/mm2). The optimal printing mode provides for the following strength parameters: UTS 366 ± 5 MPa, yield strength 223 ± 8 MPa, and relative elongation 30 ± 3%. The alloy exhibits high thermal stability for the structure and its properties. Annealing temperatures below 300 °C have no critical effect on the alloy hardness: the hardness decreases by less than 10% of the initial 110 ± 3 HV. At 350 °C, the hardness decreases by 25.5% (82 ± 2 HV); 100 h exposure at 350 °C reduces the UTS to 265 ± 2 MPa and the yield strength to 178 ± 10 MPa, while maintaining the relative elongation of 29 ± 2%.
Förderung
- Ministry of Science and Higher Education of the Russian Federation
- Russian Science Foundation
Zitieren
APA
Letyagin, N. V., Akopyan, T. K., Palkin, P. A., Solovev, I. S., Fedorenko, L. V., Chernyshikhin, S. V., Babenko, E. O., & Barkov, R. Y. (2026). Aluminum–Calcium Alloy for Laser Powder Bed Fusion. Journal of Manufacturing and Materials Processing, 10(5), 148. https://doi.org/10.3390/jmmp10050148
Vancouver
Letyagin NV, Akopyan TK, Palkin PA, Solovev IS, Fedorenko LV, Chernyshikhin SV, et al. Aluminum–Calcium Alloy for Laser Powder Bed Fusion. Journal of Manufacturing and Materials Processing. 2026;10(5):148. doi:10.3390/jmmp10050148
BibTeX
@article{Letyagin2026,
author = {Letyagin, Nikolay V. and Akopyan, Torgom K. and Palkin, Pavel A. and Solovev, Ivan S. and Fedorenko, Leonid V. and Chernyshikhin, Stanislav V. and Babenko, Ekaterina O. and Barkov, Ruslan Yu.},
title = {Aluminum–Calcium Alloy for Laser Powder Bed Fusion},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {5},
pages = {148},
doi = {10.3390/jmmp10050148}
}
EUVIMED