EUVIMEDEUVIMED entdecken
Crossref

Effect of Homogenization and Zn/Mg Ratio on the Mechanical Properties, Stress Corrosion Cracking Resistance, and Quench Sensitivity of Al–Zn–Mg–2.5Cu (AA7095) Alloys

Jhen‐Hau Jan, Shao‐Cheng Lee, Mian‐Chung Chen, Sheng‐Long Lee, Chun‐Nan Lin, Yu‐Chih Tzeng

Advanced Engineering Materials · 2025-05 · 27 (9)

DOI: 10.1002/adem.202402281 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 07.04.2025. Verfasst von Jhen‐Hau Jan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 28 Literaturangaben. Gefördert von: National Science and Technology Council, National Chung-Shan Institute of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the effect of homogenization and Zn/Mg ratio on the mechanical properties, stress corrosion cracking resistance, and quench sensitivity of Al–Zn–Mg–2.5Cu (AA7095) alloys. The alloys are processed using one‐stage and two‐stage homogenization followed by high‐temperature solution treatment and T6 aging. Mechanical properties, including hardness, tensile strength, and ductility, are evaluated. Quench sensitivity is assessed by measuring the loss of hardness at varying distances from the water‐quenched end. The results indicate that alloy B (5.4) exhibits the highest quench sensitivity due to higher precipitation kinetics. Additionally, the study reveals that the alloy with a higher Zn/Mg ratio (5.4) displays better precipitation strengthening but shows a more significant loss in hardness during quenching. SCC resistance is evaluated in both air and NaCl solution environments, showing that the alloy with a lower Zn/Mg ratio demonstrated better SCC resistance. These findings provide insights into optimizing the mechanical properties and resistance to SCC of AA7095 alloys through homogenization and Zn/Mg ratio control.

Förderung

  • National Science and Technology Council
  • National Chung-Shan Institute of Science and Technology

Zitieren

APA

Jan, J., Lee, S., Chen, M., Lee, S., Lin, C., & Tzeng, Y. (2025). Effect of Homogenization and Zn/Mg Ratio on the Mechanical Properties, Stress Corrosion Cracking Resistance, and Quench Sensitivity of Al–Zn–Mg–2.5Cu (AA7095) Alloys. Advanced Engineering Materials, 27(9). https://doi.org/10.1002/adem.202402281

Vancouver

Jan J, Lee S, Chen M, Lee S, Lin C, Tzeng Y. Effect of Homogenization and Zn/Mg Ratio on the Mechanical Properties, Stress Corrosion Cracking Resistance, and Quench Sensitivity of Al–Zn–Mg–2.5Cu (AA7095) Alloys. Advanced Engineering Materials. 2025;27(9). doi:10.1002/adem.202402281

BibTeX
@article{Jan2025,
  author = {Jan, Jhen‐Hau and Lee, Shao‐Cheng and Chen, Mian‐Chung and Lee, Sheng‐Long and Lin, Chun‐Nan and Tzeng, Yu‐Chih},
  title = {Effect of Homogenization and Zn/Mg Ratio on the Mechanical Properties, Stress Corrosion Cracking Resistance, and Quench Sensitivity of Al–Zn–Mg–2.5Cu (AA7095) Alloys},
  journal = {Advanced Engineering Materials},
  year = {2025},
  volume = {27},
  number = {9},
  doi = {10.1002/adem.202402281}
}
Kostenlos starten →