EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Stress Corrosion Cracking Resistance of Low Cu-Containing Al-Zn-Mg-Cu Alloys by Aging Treatment Control

Ying Li, Mingyang Yu, Xiwu Li, Kai Wen, Lizhen Yan, Kai Zhu, Wei Xiao iD

Materials · 21.11.2024 · 17 (23) · 5678

DOI: 10.3390/ma17235678 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.11.2024. Verfasst von Ying Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Nonferrous Metals and Processes, GRINM Group Co., Ltd., Beijing 100088, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The 7085 aluminum alloy with a low Cu content is an important lightweight structural material in the aerospace field due to its advantages of low density, high specific strength, and high hardenability. However, like other high-strength Al-Zn-Mg-Cu alloys, this alloy is susceptible to stress corrosion cracking (SCC). Additionally, the lower Cu content may increase its tendency toward SCC, potentially impacting the safe use of this alloy. Therefore, this study investigated the effects of aging treatment processes on the mechanical properties and SCC resistance of 7085 aluminum alloy. And the factors affecting the properties of the alloy were analyzed by optical microscope (OM), scanning transmission electron microscope (STEM), and energy-dispersive X-ray spectroscopy (EDS) analyses. The results indicated that increasing the secondary aging temperature and adding a tertiary aging step can significantly reduce the alloy’s susceptibility to SCC while meeting the mechanical performance requirements. The reduced SCC sensitivity was mainly attributed to the increased spacing of grain boundary precipitates, a wider precipitate-free zone at the grain boundaries, and a higher Cu content in the grain boundary precipitates.

Schlagwörter

Stichwörter der Autor:innen

Al-Zn-Mg-Cu alloymechanical propertiesmicrostructureover-agingstress corrosion cracking

Autor:innen und Institutionen

  • State Key Laboratory of Nonferrous Metals and Processes, GRINM Group Co., Ltd., Beijing 100088, China.
  • GRIMAT Engineering Institute Co., Ltd., Beijing 101407, China.
  • General Research Institute for Nonferrous Metals, Beijing 100088, China.

ORCID-Profile: Wei Xiao

Förderung

  • National Key R&D Program of China
  • National Key R&D Program of China

Zitieren

APA

Li, Y., Yu, M., Li, X., Wen, K., Yan, L., Zhu, K., & Xiao, W. (2024). Enhancing Stress Corrosion Cracking Resistance of Low Cu-Containing Al-Zn-Mg-Cu Alloys by Aging Treatment Control. Materials, 17(23), 5678. https://doi.org/10.3390/ma17235678

Vancouver

Li Y, Yu M, Li X, Wen K, Yan L, Zhu K, et al. Enhancing Stress Corrosion Cracking Resistance of Low Cu-Containing Al-Zn-Mg-Cu Alloys by Aging Treatment Control. Materials. 2024;17(23):5678. doi:10.3390/ma17235678

BibTeX
@article{Li2024,
  author = {Li, Ying and Yu, Mingyang and Li, Xiwu and Wen, Kai and Yan, Lizhen and Zhu, Kai and Xiao, Wei},
  title = {Enhancing Stress Corrosion Cracking Resistance of Low Cu-Containing Al-Zn-Mg-Cu Alloys by Aging Treatment Control},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {23},
  pages = {5678},
  doi = {10.3390/ma17235678}
}
Kostenlos starten →