EUVIMEDEUVIMED entdecken
Crossref

Effect of Homogenization Process on Microstructure of Al–Zn–Mg–Cu Aluminum Alloys

Rensong Huang, Hongfu Yang, Li Wan, Shanju Zheng, Mengnie Li, Sivasankar Koppala

Advanced Engineering Materials · 2023-06 · 25 (12)

DOI: 10.1002/adem.202201854 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 24.04.2023. Verfasst von Rensong Huang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: Ten Thousand Talent Plans for Young Top-notch Talents of Yunnan Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Herein, the best homogenization process of 466.5 °C × 36 h + 490 °C × (14–26.4 h) that can completely eliminate the coarse phases σ [Mg(Zn, Al, Cu) 2 ] and S(Al 2 CuMg) in the Al–Zn–Mg–Cu aluminum alloy is developed. The homogenization process is determined by the method of calculation phase diagram, and the experimental verification. It is shown in the results that, first, in the microstructure of the as‐cast alloys, the crystal structure of the σ [Mg(Zn, Al, Cu) 2 ], Al 7 Cu 2 Fe, and Mg 2 Si phases is determined. Second, during the homogenization process, the σ [Mg(Zn, Al, Cu) 2 ] phase dissolves and also transforms into the S(Al 2 CuMg) phase. Most importantly, the dissolution temperature range of the σ [Mg(Zn, Al, Cu) 2 ], S(Al 2 CuMg), and Al 7 Cu 2 Fe phases is determined from 472.56 to 476.36 °C, from 484.09 to 485.39 °C, and from 540.18 to 547.23 °C, respectively. At best homogenization process, the residual Al 7 Cu 2 Fe phase area fraction ranges from 1.28 ± 0.16% to 1.60 ± 0.18%. In addition, dispersed η (MgZn 2 ) phase precipitates in supersaturated Al‐matrix during differential scanning calorimeter heating. And, the concentration differences between the grain center and the eutectic of structure of Zn, Mg and Cu regression equations are established, which can provide some reference for the design of experimental parameters, thus reducing the experimental workload.

Förderung

  • Ten Thousand Talent Plans for Young Top-notch Talents of Yunnan Province

Zitieren

APA

Huang, R., Yang, H., Wan, L., Zheng, S., Li, M., & Koppala, S. (2023). Effect of Homogenization Process on Microstructure of Al–Zn–Mg–Cu Aluminum Alloys. Advanced Engineering Materials, 25(12). https://doi.org/10.1002/adem.202201854

Vancouver

Huang R, Yang H, Wan L, Zheng S, Li M, Koppala S. Effect of Homogenization Process on Microstructure of Al–Zn–Mg–Cu Aluminum Alloys. Advanced Engineering Materials. 2023;25(12). doi:10.1002/adem.202201854

BibTeX
@article{Huang2023,
  author = {Huang, Rensong and Yang, Hongfu and Wan, Li and Zheng, Shanju and Li, Mengnie and Koppala, Sivasankar},
  title = {Effect of Homogenization Process on Microstructure of Al–Zn–Mg–Cu Aluminum Alloys},
  journal = {Advanced Engineering Materials},
  year = {2023},
  volume = {25},
  number = {12},
  doi = {10.1002/adem.202201854}
}
Kostenlos starten →