EUVIMED · CrossrefZeitschrift
Металлы / Russian Metallurgy
ISSN 3034-5391 · Akademizdatcenter Nauka
Neueste Artikel
The influence of low-alloy pipe steel hydrogen saturation conditions on the sorption process
ABOUT CHARACTERISTIC TENSILE DEGRADATION STRESSES OF STRUCTURAL MATERIALS
The Historical Aspects of Creation and Current Problems of Development of Vanadium Production in Russia
Influence of Heat Treatment Conditions of Calcium-thermal Tantalum Powders on the Characteristics of Capacitor Anodes
Temperature Dependence of the Emissivity of Chromium: Experiment and Correlation Analysis
Kinetics and Mechanism of Wolframite Concentrate Interaction with Potassium Carbonate during Sintering
Obtaining Vanadium Pentoxide from Ash and Sludge Waste of Fuel Oil Thermal Power Plants using the Lime-Sulfuric Acid Method
Structure and Properties of Structural Aluminum Alloys Produced by Selective Laser Melting
Heterogeneity of Texture and Anisotropy of Mechanical Properties of Sheets made of Alloys B-1480 and B-1481
Effect of Microstructural and Crystallographic Texture Parameters on the Fracture Energy Absorption of X90 Pipeline Steel
The Influence of the Structural State of 09G2S Steel on Mechanical Properties over a Wide Temperature Range
Influence of Intensive Plastic Deformation on Properties of Hard Magnetic Alloy Fe-30% Cr-20% Co-2% Mo
Jet Plasma Electricity Nitrocarburising of a Rotating Shaft Made of Low-carbon Steel
Influence of complex modification on crystallization of complex-alloyed Hypereutectic silumin
Structure and tribological characteristics of TiAlZrN-InSn system based coatings
Study of volume and surface properties of the iron melts containing phosphorus impurity
Phase composition, texture and residual stresses in steels with 1.6 and 2.9% Mn after hardening and cold rolling
Analysis of the mechanisms of hardening of high-carbon steels during surface treatment with a highly concentrated plasma jet
Study of the protective properties of thin metal coatings obtained by magnetron sputtering on low-alloy molybdenum alloys
Electrochemical production of microdispersed tungsten oxide powder from technogenic waste of metallic tungsten under the influence of alternating current in ammonia carbonate solutions
Research of processes stimulating plastic deformation of metal materials arising under the action of electric current pulses
NUMERICAL AND LABORATORY STUDY OF THE INFLUENCE OF ELECTROMAGNETIC GTIRRING ON THE QUALITY OF SLABS CASTED ON A CCM
ANALYSIS OF CHANGES IN THE COMPOSITION AND CONTENT OF NON-METALLIC INCLUSIONS IN THE PROCESS OF DYNAMO STEEL PRODUCTION
MODELING OF THE CRYSTALLOGRAPHIC TEXTURE EVOLUTION OF ELECTRICAL STEEL DURING COLD ROLLING
APPLICATION OF SCANNING ELECTRON MICROSCOPY AND GLOW DISCHARGE ATOMIC EMISSION SPECTROMETRY METHODS TO EVALUATE THE MORPHOLOGY OF THE NEAR-SURFACE AREA OF ROLLED ELECTRICAL STEEL SAMPLES
THE METHOD OF INVESTIGATING TEXTURE AND DOMAIN STRUCTURE OF ELECTRICAL ANISOTROPIC STEEL BY MEANS OF ELECTRON MICROSCOPY
INFLUENCE OF THE CONDITIONS OF SOLID-PHASE PRESSURE WELDING AND HEAT TREATMENT ON THE STRUCTURE AND PROPERTIES OF JOINTS OF THE INTERMETALLIC ALLOY VKNA-25 Mono WITH SUPERALLOY EP975. I. INFLUENCE OF THE VACUUM DEPTH AT SOLID-STATE JOINTS
EFFECT OF ROLLING WITH REVERSAL ON THE PHYSICAL AND MECHANICAL PROPERTIES OF AD1 ALLOY SHEETS
DETERMINATION OF THE DOSE OF MECHANICAL ENERGY REQUIRED FOR MILLING ALUMINUM ALLOY CHIPS IN A PLANETARY MILL
SELECTIVE EXTRACTION OF COPPER AND ALUMINUM FROM OXIDIZED COPPER ORES
EUVIMED