EUVIMED · CrossrefZeitschrift
Journal of Industrial, Energy and Environment Technology
ISSN 3031-5700 · Politeknik Negeri Sriwijaya
Neueste Artikel
Analysis of the Effect of the Mass Ratio of Mixed Fuel Rice Husk-Betung Bamboo Biopellets in A Biomass Gasification Stove
Effect of Solar Irradiance and Tilt Angle on the Performance of a 12 Volt Off Grid Solar Power System with 400 Wp Panel Capacity
Enhanced Green Diesel Production from Hydrotreating of Used Cooking Oil via In-Situ Hydrogen Generated from Ethanol
Effect of Baglog Quantity on the Thermal Efficiency of a Steamer for Oyster Mushroom Sterilization
Effect of Airflow Rate on Biomass Gasification Stove Performance Using Rice Husk and Sawdust Pellets
Characterization Product of Bio-char and Bio-oil from Pyrolysis of Castor Bean and Rubber Seed Shell
Analysis of Hole Shape Modification and Airflow of Top-Lit Up Draft Stove to Enhance Thermal Efficiency
Effect of Fermentation Time on Biogas Composition from Palm Oil Mill Effluent (POME)
Effect of Panel Tilt Angle and Electrical Load on Inverter Efficiency in a 24V Off-Grid 200 WP Photovoltaic System
Characterization of Bio-Briquettes from Oyster Mushroom Bag Waste in Terms of the Effect of Carbonization Temperature
Performance Test of Rotary Dryer in the Process of Drying Areca Nut Seeds
Temperature Effect on the Transesterification Process of Used Cooking Oil with a CaO-MgO Catalyst in the Biodiesel Production
Thermal Efficiency of Cross Section Water Tube Boiler Based on Air Fuel Ratio and Water Level Control
Performance Analysis of Biomass Stove Based on Air Velocity using Biomass Solid Fuel
Effect of Electric Current Supply and Number of Electrode Cells on Hydrogen Gas Production as Fuel Cell Energy Source
Effectiveness Test of Biomass Stove Based on Fuel Mass Ratio of Biopellet and Betung Bamboo Chips
Making Biodiesel From a Mixture of Castor Oil and Used Cooking Oil in Terms of Stirring Time and Speed
Effect Of Combustion Air Flow Rate On Syngas Product In Updraft Gasifier System With Bamboo Charcoal Feedstock
Conversion of Used Tires to Liquid Fuel Using Thermal Cracking Method in Terms of Temperature Effect on Product Characteristic
Co-Pyrolysis of Lignite Coal and Rubber Wood Chips to Produce Syngas Based on Feedstock Ratio
Characterization of Green Diesel Product in The Hydrotreating Process of Crude Palm Oil Using Ni/Bentonite Catalysts
Conversion of CO2 to Methane (CH4) using Ni-Al Based Catalyst and Mg as Promoter via Methanation Process
Synthesis of Rice Straw and Coconut Shell-Based Bio Briquettes as an Alternative Energy
The Pressure Effect on Heat Transfer Characteristics of Vacuum Evaporator System in Sugarcane Sap Concentration Process
Analysis of Hospital Liquid Waste Processing Results using Coagulation and Advanced Oxidation Process (AOP) Methods
Effect of Adsorbent Mass and Contact Time on the Removal of Iron (Fe) Metal Ions from Palm Kernel Shells using an Adsorption Column
EUVIMED