EUVIMED · CrossrefJournal
Materials Today: Proceedings
ISSN 2214-7853 · Elsevier BV
Latest articles
A review on surface modification techniques
Self-lubricating composite coatings: A review of deposition techniques and material advancement
Experimental investigation on mechanical and thermal characteristics of waste sheep wool fiber-filled epoxy composites
ANN and RSM based predictive model development and EDM process parameters optimization on AISI 304 stainless steel
An experimental and simulation study on dielectric properties of bio-based kenaf composite laminated with PVC for futuristic applications
Effect of Zinc on electrochemical corrosion behaviour of Mg-1Sn alloy as anode for Mg batteries
Experimental investigation on physical and mechanical properties of wheat fiber filled epoxy composites
Influence of alumina powder (Al2O3) on mechanical and tribological properties of injection molded polyoxymethylene composites
Production and characterization of activated carbon from pyrolysis biochar of cellulosic cotton-based textile wastes
Review of the utilization of plastic waste in asphalt pavements in hot climate conditions – KSA as a case study
A review on the use of date palm fibers to reinforce earth-based construction materials
Comparative life cycle assessment analysis of mono, binary and ternary construction and demolition wastes-based geopolymer binders
Rheology characterization of 3D printing mortars with nanoclays and basalt fibers
Sustainable sourcing of raw materials for the built environment
Mechanical properties of a high plasticity clay mixed with sand and low-plastic silt
Reinforcement of 3D printable earth-based mortar with natural textile material
Non-destructive tests to evaluate the self-healing capacity for a 3D printing ECC material
Synthesis and characterization of Cadmium doped zinc oxide nanocomposites
Electrochemical performance of rGO/MWCNT/CoS ternary composite for supercapacitor applications
Effect of cobalt doping on the dielectric properties and electrical conductivity of nickel tungstate
Analysis of three generations of recycled concrete: An approach using LCA and weighted sum model
Effect of Sm(DBM)3Phen incorporation methodology on spectroscopic properties of PVA nanofibres
Modified biopolymers in wastewater treatment: A review
Applicability of nanomaterials in water and waste-water treatment: A state-of-the-art review and future perspectives
Deformation and energy absorption studies on FBCC and FBCCz lattice structures with symmetrical density gradients produced by L-PBF of Ti-6Al-4V alloy
The sustainable prospect of biodiesel production: Transformative technologies, catalysts from bio-wastes, and techno-economic assessment
Biological activity of phytochemicals extracted from medicinal plants of Apocynaceae family
Effect of corrosion rate on pipe material's chemical composition in water distribution network
Preparation and characterization of Graphene nanofluids for immersion quenching
Recent development in polymer coating to prevent corrosion in metals: A review
EUVIMED