EUVIMED · CrossrefJournal
Metallography, Microstructure, and Analysis
ISSN 2192-9262 · Springer Science and Business Media LLC
Latest articles
Effect of Up-Quenching on the Phase Transformation of Cu-19.15Al-7.05Mn Shape Memory Alloy
MicroArt
Comparative Analysis of Novel Aluminum Welding Fillers Reinforced with Niobium Diboride Nanoparticles to Commercial AA5356 Filler after TIG Welding of AA6061
About the Cover
Study of Microstructure and Creep Resistance of Squeeze Cast and Heat-Treated AZ91 Magnesium Alloys
Structure–Mechanical Property Relationships in Controlled Rolled Nb-Mo-V-Ti Containing HSLA Steel: The Effect of TMCP Parameters
Microstructure, Mechanical Properties, and Fracture Behavior of TIG Welded 6063 (T4 and T6) Aluminum Alloy
Microstructure and Properties of Sustainable Aluminum Matrix Composites from Solid-State Recycling of AA6061 Chip Waste
Copper-Based Sheathing and Fastenings for Wooden Ships: An Archeometallurgical Study of the Carron, Ancla Macuca, RMS Forth, and El Pesquero Wreck Sites Located in the Gulf of Mexico (Late 18th to Mid-19th Century)
Microstructural Refinement in a Low Alloy High Strength Martensitic Steel
Microstructure and Micromechanical Properties of Delta Ferrite Morphologies in Wire Arc Additive Manufacturing 316LSi Austenitic Stainless Steel
Microstructural Analysis of the Dissimilar Weld AL6XN SASS and 2205 DSS Steels Plates
Microstructural Characterization of Stitched Zones in Ti6Al4V Printed via Multi-laser Powder Bed Fusion and Using Three Stress Relief Temperatures
Cooling Curve Evaluation in Base Al–Si Alloys: Effects of Silicon Additions on the Thermal Parameters, Microstructural Patterns, and Microhardness
On the Sources of Discrepancies Between Grain Size Measurements
Examining Sigma Phase in Super Duplex Stainless Steels (UNS S32750) after Isothermal Aging, Focusing on Its Influence on Etching and Pitting Corrosion with Optical Microscopy
Multi-pass Friction Stir Welding of Al–TiC–Zn–Mg Composite: Microstructure and Mechanical Characteristics
Study on Properties and Microstructure of Wire Arc Additive Manufactured 2209 Duplex Stainless Steel
Review of Process–Structure–Property Relationships in Metals Fabricated Using Binder Jet Additive Manufacturing
Studies on the Mechanical Properties and Wear Behavior of an AZ91D Magnesium Metal Matrix Composite Utilizing the Stir Casting Method
In Situ Alloying through Laser-Powder Bed Fusion of a 60%Inconel718-40%Cu Powders Mixture
Effect of Pearlite Banding and Weld Texture on Wheel Rim Failure in Resistance Upset Butt Welding
Microstructural and Corrosion Characteristics of Al-Zn-In Sacrificial Anode Fabricated by Cooling Slope Casting Through Response Surface Methodology: A Modeling Study
Effect of Plasma Nitriding on Structure and Properties of Titanium Grade 2 Produced by Direct Metal Laser Sintering
Effect of Al Content on the Microstructure and Properties of As-Cast AlxCoCrCuFe Alloys
Effect of Cooling Rate on Phase Transformation Kinetics and Microstructure of Nb–Ti Microalloyed Low Carbon HSLA Steel
Preparation of Al-Al2Cu Composites In-situ Processed Via Reactive Infiltration
Martensitic Transformation in AISI-316 Austenitic Steel During Thermomechanical Processing
Comparative Study on Thermal Fatigue Behavior of Two Hot Work Die Steels
Effect of Initial α-Phase Morphology on Microstructure, Mechanical Properties, and Work-Hardening Instability During Heat Treatment of TC21 Ti-Alloy
EUVIMED