EUVIMED · CrossrefZeitschrift
Structural Concrete
ISSN 1464-4177 · Wiley
Neueste Artikel
Engineering one‐part geopolymer for 3D printing using dolomite powder: Rheology, printability, microstructure and sustainability
Seismic performance of prefabricated reinforced concrete joints with embedded steel plate welding connection
Thermal, mechanical, and durability performance of self‐compacting mortars incorporating recycled aggregate‐based composite phase change materials
Design of an opening in an existing cylindrical RC post‐compressed clinker silo
Experimental and numerical investigation of double‐embedded blind‐bolted concrete‐filled steel tube connections subjected to cyclic tension load
Microstructural properties of ordinary concrete mixed with rubber and plastic waste under aggressive environmental conditions: A full‐factorial design study
Influence of anchorage on the behavior of geogrid‐textile‐reinforced concrete strengthened RC beams
Safety assessment and model validation of the Elbe Bridge in Bad Schandau through load testing
Axial compressive behavior and capacity reduction of circular CFST stub columns with internal discrete voids
Effect of ambient chloride concentration in environment on peak chloride concentration and its randomness of concrete
Engineering the future: AI ‐driven design tool for 3D ‐printed concrete buildings
A large span stiff skeleton reinforced concrete arch bridge in a complex canyon environment: The Taohe River Bridge
Blast resistance performance of BFRP bar‐reinforced concrete box utility tunnel: A theoretical and experimental study
Experimental study on the axial behavior of steel slag fine aggregate concrete stub columns
Study on an aided design method for partially composite precast concrete sandwich panels based on degree of composite action prediction
Compression–bending resistance of corrugated steel tube‐confined rubberized concrete columns considering non‐uniform confinement
Mechanical behavior of bolted joints in precast segmental concrete structures subjected to impact loads
Microstructural characteristics and compression stress–strain behavior of recycled steel fiber‐reinforced recycled self‐compacting concrete
Enhancing spalling prevention of self‐compacting concrete at elevated temperatures: Incorporation of steel‐ PVA fibers
A post‐cracking kinematic compatibility model for axial thrust in restrained prestressed hollow‐core slabs
Effect of strengthening methods on eccentric compression of rubber concrete‐filled double‐skin columns
Experimental evaluation of load distribution in precast prestressed hollow core floors
Seismic fragility analysis of single‐pylon double‐plane highway cable‐stayed bridge
Strength performance of CFDST K‐joints after and before elevated temperatures: Experimental and numerical investigation
Experimental and numerical investigation on the flexural response of GFRP ‐reinforced SFRC beams
Evaluation of cold joint effects on the microstructure and mechanical behavior of three‐dimensional printed concrete specimen
Effect of recycled concrete powder and GGBS / FA ratio on the performance and microstructure of geopolymer mortar
Evaluation of prestress losses in concrete beams using destructive and non‐destructive methods
Cold‐cured alkali‐activated slag/Portland cement composites: The role of cement content and alkali dosage on mechanical performance, microstructure, and sulfate durability
Experimental investigation on post‐installed anchorages with cast‐in anchor reinforcement under tension loading
EUVIMED