EUVIMED · CrossrefZeitschrift
Tsvetnye Metally
ISSN 0372-2929 · Ore and Metals Publishing House
Neueste Artikel
Investigation of methods for the selective removal of copper from intermediate products of precious metal refining
Depletion of precious metal refinery mother liquors by cementation on compact zinc under the application of alternating current
Increasing iridium recovery from production solutions in platinum-group metal refining
Digital optimization of density regimes in key flotation operations through automatic water feed control
Sorption of zinc, lead, and iron (III) impurities from chloride-sulfate nickel solutions using AMP-p anion-exchange resin
Analysis of contradictions in current understanding of cathodic and side processes during neodymium electrolysis
Application of oxidative roasting to enhance gold recovery from autoclave oxidation residues of refractory gold-bearing carbonaceous material
Changing sulfide copper-nickel raw materials: a modern challenge for autogenous smelting technologies. Modeling results and rationale for selecting the optimal technology
Determination, investigation, and application of the mechanical properties of rolled thin strips produced from industrial batch AMts aluminum alloy billets
Investigation of deformation gradient formation in a 6061/AZ31B/6061 layered composite during asymmetric rolling
Obtaining commercial concentrates of precious metals from semi-finished product of copper sludge processing by sulfatization method. Part 2
Production of rhodium sulfate and rhodium plating electrolytes and their use in the jewelry and electronic industries
Study on the possibility of selective lead extraction from Ag – Pb intermediate products of refining production
Improving the efficiency of processing hydroxide precipitation of nitration of refining production
Kinetics of secondary phase dissolution during conditioning of pressure oxidation pulp from the Pioneer deposit concentrate blend with limestone
Effect of the degree of coke impregnation on the properties of prebaked anodes
Purification of sodium molybdate solutions from phosphorus and tungsten impurities
Evolution of the structure of a thermally strengthened alloy of the Al – Zn – Mg – Ca – Fe system during wire production
Influence of europium on crystallization parameters, structure, and performance characteristics of eutectic silumin
The influence of the rolling direction on the formation of the size, hardness and electrical conductivity of aluminum AMg2 alloy sheets
The effect of laser treatment on the hardness and abrasive wear of the VK8 hard alloy
Development of energy-efficient geometry of the submersible horizontal mixer
Improving the efficiency of electrodynamic separation of electronic waste
Redox characteristics of gold in HCl – Cl2, HCl – MnO2, and H2SO4 – NaCl – MnO2 solutions: A review
The effect of calcium on the structure, deformability, and mechanical properties of aluminum alloys containing 6% Cu and 2% Mn
Parameters of 198 tetratectic points of four-phase equilibria of 46 binary metal systems
Studying the influence of chemical composition and homogenization modes on the formation of mechanical properties and microstructure of aluminum sheets made from alloy 1590
Structure and properties of butt joints of alloy sheets of the Al – Zn – Mg – Ca system obtained by friction stir welding
The effect of rolling conditions of workpieces made of brass sheets on thinning during an axisymmetric part drawing
Electrolytic plasma polishing and its application to the study of the 1565ch alloy structure
EUVIMED