MODIFICATION OF THE SURFACE LAYERS OF ALUMINUM ALLOY BY LASER ALLOYING WITH SILICON CARBIDE
Физика металлов и металловедение / Physics of Metals and Metallography · 2025 · 126 (10) · 1190
DOI: 10.7868/s3034621525100115 ↗Kurz gefasst
Fachartikel in der Zeitschrift Физика металлов и металловедение / Physics of Metals and Metallography, 2025. Verfasst von N.A. Davydova und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Laser surface alloying of the AlSi7Mg alloy with silicon carbide powder was performed using a CO laser with a wavelength of λ = 10.6 μm. The structure, chemical and phase composition, microhardness, micromechanical characteristics and wear resistance under conditions of abrasive wear and sliding friction of the alloyed layer were investigated. It has been established that SiC laser alloying resulted in formation of a fused layer with a thickness of up to 4.0 mm on the surface of AlSi7Mg alloy samples. This layer consisted of two zones: an upper zone with a thickness of 400 μm, composed of α + Si eutectic, primary silicon inclusions, as well as strengthening phases such as SiC, AlSiC, and AlO, and an underlying zone composed of α-phase and dispersed α + Si eutectics without strengthening particles. The average microhardness of the modified surface layer of the AlSi7Mg alloy was 700 HV 0.025. The alloyed layer has increased resistance to elastic-plastic deformation and increased wear resistance under abrasive wear conditions.
Zitieren
APA
Davydova, N., Soboleva, N., & Makarov, A. (2025). MODIFICATION OF THE SURFACE LAYERS OF ALUMINUM ALLOY BY LASER ALLOYING WITH SILICON CARBIDE. Физика металлов и металловедение / Physics of Metals and Metallography, 126(10), 1190. https://doi.org/10.7868/s3034621525100115
Vancouver
Davydova N, Soboleva N, Makarov A. MODIFICATION OF THE SURFACE LAYERS OF ALUMINUM ALLOY BY LASER ALLOYING WITH SILICON CARBIDE. Физика металлов и металловедение / Physics of Metals and Metallography. 2025;126(10):1190. doi:10.7868/s3034621525100115
BibTeX
@article{Davydova2025,
author = {Davydova, N.A. and Soboleva, N.N. and Makarov, A.V.},
title = {MODIFICATION OF THE SURFACE LAYERS OF ALUMINUM ALLOY BY LASER ALLOYING WITH SILICON CARBIDE},
journal = {Физика металлов и металловедение / Physics of Metals and Metallography},
year = {2025},
volume = {126},
number = {10},
pages = {1190},
doi = {10.7868/s3034621525100115}
}
EUVIMED