EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Overcoming Processability Limitations in Al6082 Alloy by Using Laser Powder Bed Fusion of Aluminum Matrix Composites with Titanium Carbide/Silicon Carbide Reinforcements

Raúl Gómez, Maria San Sebastian, Teresa Guraya, Ane Miren Mancisidor

Metals · 08.11.2025 · 15 (11) · 1232

DOI: 10.3390/met15111232 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 08.11.2025. Verfasst von Raúl Gómez und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CDTI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of aluminum alloys in aerospace is limited by their poor weldability, making many incompatible with additive manufacturing (AM) processes like powder bed fusion—laser beam metal (PBF-LB/M), known as well as laser powder bed fusion. This incompatibility hinders the fabrication of complex, lightweight components. To overcome this, Aluminum Metal Matrix Composites (AMMCs) are formed by mechanically alloying the non-processable Al6082 base alloy with ceramic reinforcements; subsequently, Titanium Carbide (TiC) and Silicon Carbide (SiC) particles are developed. This approach induces microstructural changes necessary for AM compatibility. The influence of varying reinforcement contents (1–5 wt.%) on powder homogeneity, microstructural evolution (via Energy Dispersive X-ray Spectroscopy and Electron Backscatter Diffraction), processability, and mechanical properties is systematically studied. The key finding is that metallurgical modification is a robust solution. TiC addition at 2 wt.% and 5 wt.% completely eliminated solidification cracking, achieving high processability. SiC substantially reduced cracking compared to the base alloy. These results demonstrate the potential of AMMCs to successfully translate conventional, non-weldable aluminum alloys into the realm of advanced additive manufacturing.

Förderung

  • CDTI

Zitieren

APA

Gómez, R., Sebastian, M. S., Guraya, T., & Mancisidor, A. M. (2025). Overcoming Processability Limitations in Al6082 Alloy by Using Laser Powder Bed Fusion of Aluminum Matrix Composites with Titanium Carbide/Silicon Carbide Reinforcements. Metals, 15(11), 1232. https://doi.org/10.3390/met15111232

Vancouver

Gómez R, Sebastian MS, Guraya T, Mancisidor AM. Overcoming Processability Limitations in Al6082 Alloy by Using Laser Powder Bed Fusion of Aluminum Matrix Composites with Titanium Carbide/Silicon Carbide Reinforcements. Metals. 2025;15(11):1232. doi:10.3390/met15111232

BibTeX
@article{Gmez2025,
  author = {Gómez, Raúl and Sebastian, Maria San and Guraya, Teresa and Mancisidor, Ane Miren},
  title = {Overcoming Processability Limitations in Al6082 Alloy by Using Laser Powder Bed Fusion of Aluminum Matrix Composites with Titanium Carbide/Silicon Carbide Reinforcements},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {11},
  pages = {1232},
  doi = {10.3390/met15111232}
}
Kostenlos starten →