Mechanical properties of the FML composites
Technologia i Automatyzacja Montażu · 2026 · 132 (2) · 31-36
DOI: 10.7862/tiam.2026.2.3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Technologia i Automatyzacja Montażu, 2026. Verfasst von Damian Dubis und 2 weiteren Autor:innen.
Abstract (Originalsprache)
The aim of this paper is to investigate the adhesion between an aluminum alloy and a carbon fiber-reinforced laminate. For this purpose, samples were prepared for tensile, tear, and shear strength testing. At the beginning information on laminate composites, their types and their components have been presented. To perform the tests three types of samples were prepared, consisting of a carbon fiber laminate and a PA6 (AW-2017) aluminum alloy laminated with L-285 epoxy resin into a single composite. An aluminum alloy with an unsealed anode, an aluminum alloy with a sealed anode, and an aluminum alloy without an anode coating were used. During the breaking test, it can be seen that the aluminum alloy with an unsealed anode exhibits the highest adhesion strength. In this case, the breaking moment of the sample is clearly visible. It can also be observed that the joint in the laminate sample with the aluminum alloy with an unsealed anode is much more resistant to shear than in the other samples.
Zitieren
APA
Dubis, D., Fejkiel, R., & Racławski, M. (2026). Mechanical properties of the FML composites. Technologia i Automatyzacja Montażu, 132(2), 31-36. https://doi.org/10.7862/tiam.2026.2.3
Vancouver
Dubis D, Fejkiel R, Racławski M. Mechanical properties of the FML composites. Technologia i Automatyzacja Montażu. 2026;132(2):31-36. doi:10.7862/tiam.2026.2.3
BibTeX
@article{Dubis2026,
author = {Dubis, Damian and Fejkiel, Romuald and Racławski, Michał},
title = {Mechanical properties of the FML composites},
journal = {Technologia i Automatyzacja Montażu},
year = {2026},
volume = {132},
number = {2},
pages = {31--36},
doi = {10.7862/tiam.2026.2.3}
}
EUVIMED