EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bio-Composites for Additive Manufacturing Study of the Mechanical Properties

Francisco Comino, José A. Martínez-Sánchez, Marco Zaza, Sabina Campanelli, Roberto Spina

Defect and Diffusion Forum · 17.04.2026 · 451 · 125-131

DOI: 10.4028/p-dseb6i ↗

Kurz gefasst

Fachartikel in der Zeitschrift Defect and Diffusion Forum, online erschienen am 17.04.2026. Verfasst von Francisco Comino und 4 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of the present research was to identify the mechanical properties of 3D-printed biocomposite parts and their variation with different natural fillers (olive wood and almond shell). The materials were produced by filament extrusion with 5% fiber content in the polylactic acid matrix, and the samples were fabricated using the Material Extrusion Additive Manufacturing process. 3D printed specimens underwent tensile and flexural tests to assess their mechanical properties. The results showed reductions of 5%-18% in the tensile modulus and 10%-38% in the tensile strength for olive wood-and almond shell-based PLA, respectively. The same trend was detected for the flexural properties, with a slight reduction of 2%-3% in the flexural modulus and 3%-5% in flexural strength.

Zitieren

APA

Comino, F., Martínez-Sánchez, J. A., Zaza, M., Campanelli, S., & Spina, R. (2026). Bio-Composites for Additive Manufacturing Study of the Mechanical Properties. Defect and Diffusion Forum, 451, 125-131. https://doi.org/10.4028/p-dseb6i

Vancouver

Comino F, Martínez-Sánchez JA, Zaza M, Campanelli S, Spina R. Bio-Composites for Additive Manufacturing Study of the Mechanical Properties. Defect and Diffusion Forum. 2026;451:125-131. doi:10.4028/p-dseb6i

BibTeX
@article{Comino2026,
  author = {Comino, Francisco and Martínez-Sánchez, José A. and Zaza, Marco and Campanelli, Sabina and Spina, Roberto},
  title = {Bio-Composites for Additive Manufacturing Study of the Mechanical Properties},
  journal = {Defect and Diffusion Forum},
  year = {2026},
  volume = {451},
  pages = {125--131},
  doi = {10.4028/p-dseb6i}
}
Kostenlos starten →