EUVIMEDEUVIMED entdecken
Crossref

The influence of plasma nitriding process conditions on the microstructure of coatings obtained on the substrate of selected tool steels

Magdalena Mokrzycka, Adrianna Przybyło, Marek Góral, Barbara Kościelniak, Marcin Drajewicz, Tadeusz Kubaszek, Kamil Gancarczyk, Andrzej Gradzik, Kamil Dychtoń, Marek Poręba, Jakub Jopek, Maciej Pytel

Advances in Mechanical and Materials Engineering · 2024

DOI: 10.7862/rm.2024.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Mechanical and Materials Engineering, 2024. Verfasst von Magdalena Mokrzycka und 11 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the results of research into the influence of the time of the plasma nitriding process on the microstructure of the coatings obtained. Cold-work tool steels (60WCrV8, 90MnCrV8, 145Cr6), hot-work tool steel (X37CrMoV5-1) and high-speed tool steel (HS6-5-2) were selected as substrate material. The processes were carried out under industrial conditions using an Ionit device from Oerlikon Metaplas with variable process times of 2, 4 and 6 hours. According to literature data, a nitriding mixture consisting of 5% nitrogen and 95% hydrogen was chosen, which allowed the expected diffusion layer to be obtained without a white layer (composed of iron nitrides). Analysis of elemental mapping indicates that the presence and content of nitride-forming elements influences the formation of alloy additive nitrides in the microstructure of the diffusion layer. It was also found that an increase in the duration of plasma nitriding, results in an increase in the depth of the nitrided layers formed on the substrate of high-alloy steels: X37CrMoV5-1 and HS6-5-2. Nitrides of alloying additives, present in the diffusion layer, are formed in the high-alloyed the hot-work steel X37CrMoV5-1, indicating that these steels are the most suitable for plasma nitriding of the entire tool steels analysed.

Zitieren

APA

Mokrzycka, M., Przybyło, A., Góral, M., Kościelniak, B., Drajewicz, M., Kubaszek, T., Gancarczyk, K., Gradzik, A., Dychtoń, K., Poręba, M., Jopek, J., & Pytel, M. (2024). The influence of plasma nitriding process conditions on the microstructure of coatings obtained on the substrate of selected tool steels. Advances in Mechanical and Materials Engineering. https://doi.org/10.7862/rm.2024.1

Vancouver

Mokrzycka M, Przybyło A, Góral M, Kościelniak B, Drajewicz M, Kubaszek T, et al. The influence of plasma nitriding process conditions on the microstructure of coatings obtained on the substrate of selected tool steels. Advances in Mechanical and Materials Engineering. 2024. doi:10.7862/rm.2024.1

BibTeX
@article{Mokrzycka2024,
  author = {Mokrzycka, Magdalena and Przybyło, Adrianna and Góral, Marek and Kościelniak, Barbara and Drajewicz, Marcin and Kubaszek, Tadeusz and Gancarczyk, Kamil and Gradzik, Andrzej and Dychtoń, Kamil and Poręba, Marek and Jopek, Jakub and Pytel, Maciej},
  title = {The influence of plasma nitriding process conditions on the microstructure of coatings obtained on the substrate of selected tool steels},
  journal = {Advances in Mechanical and Materials Engineering},
  year = {2024},
  doi = {10.7862/rm.2024.1}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche