EUVIMEDEUVIMED entdecken
Crossref

Application of the Finite Element Method to Simulate the Friction Phenomenon in a Strip Drawing Test

Romuald Fejkiel, Patryk Goleń

Advances in Mechanical and Materials Engineering · 2023

DOI: 10.7862/rm.2023.5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Mechanical and Materials Engineering, 2023. Verfasst von Romuald Fejkiel und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Friction is an undesirable phenomenon in the flange area of the drawpiece in sheet metal forming processes, causing a deterioration in surface finish and a decrease in the formability limits of the sheet metal. The aim of this work is numerical analysis using the finite element method of the strip drawing test with two rounded countersamples. This test simulates friction conditions in the flange area of the drawpiece. The results of the experimental research on the influence of surface roughness on the value of the friction coefficient of S235 steel samples were used to verify the numerical results. The relation between the real contact area and the mean roughness Ra of the countersamples was determined. The real contact area increases with the increase of the mean roughness Ra. In sheet metal forming processes, the coefficient of friction depends on the real contact area, and its value increases with the increase of the real contact area.

Zitieren

APA

Fejkiel, R., & Goleń, P. (2023). Application of the Finite Element Method to Simulate the Friction Phenomenon in a Strip Drawing Test. Advances in Mechanical and Materials Engineering. https://doi.org/10.7862/rm.2023.5

Vancouver

Fejkiel R, Goleń P. Application of the Finite Element Method to Simulate the Friction Phenomenon in a Strip Drawing Test. Advances in Mechanical and Materials Engineering. 2023. doi:10.7862/rm.2023.5

BibTeX
@article{Fejkiel2023,
  author = {Fejkiel, Romuald and Goleń, Patryk},
  title = {Application of the Finite Element Method to Simulate the Friction Phenomenon in a Strip Drawing Test},
  journal = {Advances in Mechanical and Materials Engineering},
  year = {2023},
  doi = {10.7862/rm.2023.5}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche