EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application of Extended Finite Element Method for Studying Crack Propagation of Welded Strip Steel in the Cold Rolling Process

Jianjun Chen, Chaojie Wu, Jiacong Ying

Materials · 28.08.2023 · 16 (17) · 5870

DOI: 10.3390/ma16175870 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.08.2023. Verfasst von Jianjun Chen und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the cold rolling process, edge cracks, particularly those near the welded zone, can inadvertently lead to strip rupture. This study employed the extended finite element method (XFEM) to analyze the crack propagation behavior in welded strip steel during cold rolling. Various tests such as the tensile test, essential work of fracture (EWF) test, spherical indentation method, and elastoplastic finite element simulations were conducted to determine the maximum principal stress and fracture energy utilized in XFEM for the base metal and weld metal, respectively. A continuous cold rolling model was established to investigate the crack propagation behaviors in the base metal, weld metal, and the interface between the base and weld metal. In the continuous rolling process, the crack propagation and expansion speed in the base metal are much larger than that of the weld zone. In addition, the base metal at the back end of the rolled piece is more prone to fracture than the base metal at the front end.

Schlagwörter

Stichwörter der Autor:innen

cold rollingcrack propagationextended finite element methodnumerical simulationwelded strip steel

Autor:innen und Institutionen

  • School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China.

Förderung

  • Natural Science Foundation of China

Zitieren

APA

Chen, J., Wu, C., & Ying, J. (2023). Application of Extended Finite Element Method for Studying Crack Propagation of Welded Strip Steel in the Cold Rolling Process. Materials, 16(17), 5870. https://doi.org/10.3390/ma16175870

Vancouver

Chen J, Wu C, Ying J. Application of Extended Finite Element Method for Studying Crack Propagation of Welded Strip Steel in the Cold Rolling Process. Materials. 2023;16(17):5870. doi:10.3390/ma16175870

BibTeX
@article{Chen2023,
  author = {Chen, Jianjun and Wu, Chaojie and Ying, Jiacong},
  title = {Application of Extended Finite Element Method for Studying Crack Propagation of Welded Strip Steel in the Cold Rolling Process},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {17},
  pages = {5870},
  doi = {10.3390/ma16175870}
}
Kostenlos starten →