EUVIMEDEUVIMED entdecken
Crossref

Influence of Input Parameters on the Coefficient of Friction during Incremental Sheet Forming of Grade 5 Titanium Alloy

Marcin Szpunar, Paulina Szawara, Piotr Myśliwiec, Robert Ostrowski

Advances in Mechanical and Materials Engineering · 2023 · 40 · 113-123

DOI: 10.7862/rm.2023.12 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Mechanical and Materials Engineering, 2023. Verfasst von Marcin Szpunar und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research paper focuses on investigating the influence of input parameters on the coefficient of friction (COF) during incremental sheet forming (ISF) of grade 5 titanium sheets. Titanium alloys are widely used in various industries due to their corrosion resistance and strength to weight ratio. ISF is a flexible and cost effective process for producing complex shapes. The aim of this study was to gain insight into the frictional conditions during ISF that affect formability, surface quality, and overall process performance. The experiments were carried out using a combination of MoS2 lubrication and friction stir rotation-assisted heating. COF was measured using a high precision piezoelectric dynamometer, taking into account axial and horizontal forces. A split-plot design was used and 25 runs were performed to obtain the COF for each run. The results of the study provide valuable information on the relationship between input parameters and COF, contributing to the understanding of the frictional conditions in the ISF.

Zitieren

APA

Szpunar, M., Szawara, P., Myśliwiec, P., & Ostrowski, R. (2023). Influence of Input Parameters on the Coefficient of Friction during Incremental Sheet Forming of Grade 5 Titanium Alloy. Advances in Mechanical and Materials Engineering, 40, 113-123. https://doi.org/10.7862/rm.2023.12

Vancouver

Szpunar M, Szawara P, Myśliwiec P, Ostrowski R. Influence of Input Parameters on the Coefficient of Friction during Incremental Sheet Forming of Grade 5 Titanium Alloy. Advances in Mechanical and Materials Engineering. 2023;40:113-123. doi:10.7862/rm.2023.12

BibTeX
@article{Szpunar2023,
  author = {Szpunar, Marcin and Szawara, Paulina and Myśliwiec, Piotr and Ostrowski, Robert},
  title = {Influence of Input Parameters on the Coefficient of Friction during Incremental Sheet Forming of Grade 5 Titanium Alloy},
  journal = {Advances in Mechanical and Materials Engineering},
  year = {2023},
  volume = {40},
  pages = {113--123},
  doi = {10.7862/rm.2023.12}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche