EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect Analysis of Process Parameters on Geometric Dimensions during Belt-Heated Incremental Sheet Forming of AA2024 Aluminum Alloy

Zhengfang Li, Zhengyuan Gao, Zhiguo An, Han Lin, Pengfei Sun, Zhong Ren, Zhengyang Qiao, Yuhang Zhang, Youdong Jia

Coatings · 17.07.2024 · 14 (7) · 889

DOI: 10.3390/coatings14070889 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 17.07.2024. Verfasst von Zhengfang Li und 8 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Special Basic Cooperative Research Programs of Yunnan Provincial Undergraduate Universities’ Association, Yunnan Xingdian Talent Support Program Youth Talent Special Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of process parameters on geometric dimensions is complex during belt-heated incremental sheet forming, leading to control difficulties in the geometric dimension of parts. In this study, the geometric errors were analyzed under the action of different process parameters, and the corresponding influence law was obtained through macro- and microexperiments. On this basis, the micromorphology of the deformation region section was analyzed in detail, and the effect of process parameters on micromorphology characteristics was obtained during belt-heated incremental sheet forming. Meanwhile, the dislocation density of the deformation region section was analyzed through XRD, and the change law of the dislocation density was revealed under the action of different process parameters. Therefore, the macro and micro effect mechanism of process parameters on geometric dimensions was verified, and then the control method of the geometric dimension was obtained in belt-heated incremental sheet forming.

Förderung

  • National Natural Science Foundation of China
  • Special Basic Cooperative Research Programs of Yunnan Provincial Undergraduate Universities’ Association
  • Yunnan Xingdian Talent Support Program Youth Talent Special Project
  • Scientific and Technological Research Program of Chongqing Science and Technology Bureau
  • Talent Introduction Project of Kunming University
  • Scientific Research Fund Project of Yunnan Provincial Department of Education

Zitieren

APA

Li, Z., Gao, Z., An, Z., Lin, H., Sun, P., Ren, Z., Qiao, Z., Zhang, Y., & Jia, Y. (2024). Effect Analysis of Process Parameters on Geometric Dimensions during Belt-Heated Incremental Sheet Forming of AA2024 Aluminum Alloy. Coatings, 14(7), 889. https://doi.org/10.3390/coatings14070889

Vancouver

Li Z, Gao Z, An Z, Lin H, Sun P, Ren Z, et al. Effect Analysis of Process Parameters on Geometric Dimensions during Belt-Heated Incremental Sheet Forming of AA2024 Aluminum Alloy. Coatings. 2024;14(7):889. doi:10.3390/coatings14070889

BibTeX
@article{Li2024,
  author = {Li, Zhengfang and Gao, Zhengyuan and An, Zhiguo and Lin, Han and Sun, Pengfei and Ren, Zhong and Qiao, Zhengyang and Zhang, Yuhang and Jia, Youdong},
  title = {Effect Analysis of Process Parameters on Geometric Dimensions during Belt-Heated Incremental Sheet Forming of AA2024 Aluminum Alloy},
  journal = {Coatings},
  year = {2024},
  volume = {14},
  number = {7},
  pages = {889},
  doi = {10.3390/coatings14070889}
}
Kostenlos starten →