Investigation of the potential use of copper mine tailings as a precursor material in geopolymer production
Revista de la Construcción · 08.08.2026 · 25 (2) · 448-471
DOI: 10.7764/rdlc.25.2.448 ↗Kurz gefasst
Fachartikel in der Zeitschrift Revista de la Construcción, online erschienen am 08.08.2026. Verfasst von İlknur Bekem Kara und 1 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
The utilization of mining wastes as aluminosilicate precursors in geopolymer production offers a promising approach for sustainable waste management and the development of alternative binder systems. This study investigates the potential use of copper mine tailings (CT) as a precursor material in geopolymer mortar production. Raw CT and thermally activated CT calcined at 850 °C (CCT) were used either as sole binders or in binary combinations with micro silica (MS), ground granulated blast furnace slag (GGBFS), and roof tile powder (RTP). A 12 Molar Sodium hydroxide (NaOH) solution was employed as the alkaline activator. The results showed that raw CT exhibited limited reactivity when used alone, resulting in compressive strengths of 2.16 MPa and 3.11 MPa at 1 and 28 days, respectively. Calcination improved the alkali-activation performance of CT, increasing the compressive strength of the CCT-based reference mixture by 151% at 1 day and 104% at 28 days compared with raw CT. The flow diameter values of the mixtures ranged between 100 and 130 mm, and binary binder systems generally improved workability. Among all mixtures, the CC50-G50 mixture, containing 50% CCT and 50% GGBFS, achieved the highest 28-day compressive strength of 22.11 MPa, indicating the beneficial role of calcium-rich GGBFS in strength development. The CC50-S50 mixture also showed improved performance, reaching 16.20 MPa at 28 days. Ultrasonic pulse velocity (UPV) results supported the positive influence of calcination and secondary binder incorporation on matrix compactness. Scanning electron microscopy- Energy-dispersive X-ray spectroscopy (SEM-EDS) analyses indicated that the improved mechanical performance of the GGBFS-containing mixture was associated with a denser microstructure, fewer visible cracks, and the formation of calcium-containing aluminosilicate gel phases. In particular, the relatively balanced Si/Al ratio and higher Ca/Si ratio of the CC50-G50 mixture were associated with enhanced gel formation and strength development. Overall, the direct use of raw copper mine tailings resulted in limited mechanical performance; however, calcination combined with suitable secondary binders, especially GGBFS, significantly improved the potential of CT-based materials for sustainable geopolymer binder production.
Zitieren
APA
Kara, İ. B., & Kara, C. (2026). Investigation of the potential use of copper mine tailings as a precursor material in geopolymer production. Revista de la Construcción, 25(2), 448-471. https://doi.org/10.7764/rdlc.25.2.448
Vancouver
Kara İB, Kara C. Investigation of the potential use of copper mine tailings as a precursor material in geopolymer production. Revista de la Construcción. 2026;25(2):448-471. doi:10.7764/rdlc.25.2.448
BibTeX
@article{Kara2026,
author = {Kara, İlknur Bekem and Kara, Cuma},
title = {Investigation of the potential use of copper mine tailings as a precursor material in geopolymer production},
journal = {Revista de la Construcción},
year = {2026},
volume = {25},
number = {2},
pages = {448--471},
doi = {10.7764/rdlc.25.2.448}
}
EUVIMED