Use of Abandoned Copper Tailings as a Precursor to the Synthesis of Fly-Ash-Based Alkali Activated Materials
Materials · 22.08.2025 · 18 (17) · 3926
DOI: 10.3390/ma18173926 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 22.08.2025. Verfasst von Arturo Reyes-Román und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mining Engineering, University of Antofagasta, Avenida Angamos 601, Antofagasta 1270300, Chile. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 99 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Nacional de Investigación y Desarrollo, Ministry of Education, ANID.
Abstract (Originalsprache)
This study evaluated the feasibility of reusing abandoned copper mine tailings (Cu tailings) as a precursor in the production of fly-ash-based alkali-activated materials (FA-AAMs). Two formulations were developed by combining FA and Cu tailings with a mixture of sodium silicate and sodium hydroxide as alkaline activators at room temperature (20 °C). Formulation G1 consisted of 70% Cu tailings and 30% fly ash (FA), whereas G2 included the same composition with an additional 15% ordinary Portland cement (OPC). The materials were characterized using X-ray fluorescence (XRF), -X-ray diffraction (XRD), field emission scanning electron microscopy with energy-dispersive spectroscopy (FESEM-EDS), and particle size analysis. While FA exhibited a high amorphous content (64.4%), Cu tailings were largely crystalline and acted as inert fillers. After 120 days of curing, average compressive strength reached 24 MPa for G1 and 41 MPa for G2, with the latter showing improved performance due to synergistic effects of geopolymerization and OPC hydration. Porosity measurements revealed a denser microstructure in G2 (35%) compared to G1 (52%). Leaching tests confirmed the immobilization of hazardous elements, with arsenic concentrations decreasing over time and remaining below regulatory limits. Despite extended setting times (24 h for G1 and 18 h for G2) and the appearance of surface efflorescence, both systems demonstrated good chemical stability and long-term performance. The results support the use of Cu tailings in FA-AAMs as a sustainable strategy for waste valorization, enabling their application in non-structural and moderate-load-bearing construction components or waste encapsulation units. This approach contributes to circular economy goals while reducing the environmental footprint associated with traditional cementitious systems.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mining Engineering, University of Antofagasta, Avenida Angamos 601, Antofagasta 1270300, Chile.
- School of Technology, Kajaani University of Applied Sciences, Ketunpolku 1, 87101 Kajaani, Finland.
- Outokumpu Stainless Oy, Terästie, 95490 Tornio, Finland.
- DIATI-Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino, 10129 Torino, Italy.
- School of Civil Construction, Faculty of Engineering & Concrete Innovation Hub UC (CIHUC), Pontificia Universidad Católica de Chile, Santiago 7820436, Chile.
ORCID-Profile: Tatiana Samarina, Daniza Castillo-Godoy, Giuseppe Campo, Gerardo Araya-Letelier, Yimmy Fernando Silva
Förderung
- Agencia Nacional de Investigación y Desarrollo
- Ministry of Education
- ANID
- Politecnico di Torino
Zitieren
APA
Reyes-Román, A., Samarina, T., Castillo-Godoy, D., Takaluoma, E., Campo, G., Araya-Letelier, G., & Silva, Y. F. (2025). Use of Abandoned Copper Tailings as a Precursor to the Synthesis of Fly-Ash-Based Alkali Activated Materials. Materials, 18(17), 3926. https://doi.org/10.3390/ma18173926
Vancouver
Reyes-Román A, Samarina T, Castillo-Godoy D, Takaluoma E, Campo G, Araya-Letelier G, et al. Use of Abandoned Copper Tailings as a Precursor to the Synthesis of Fly-Ash-Based Alkali Activated Materials. Materials. 2025;18(17):3926. doi:10.3390/ma18173926
BibTeX
@article{ReyesRomn2025,
author = {Reyes-Román, Arturo and Samarina, Tatiana and Castillo-Godoy, Daniza and Takaluoma, Esther and Campo, Giuseppe and Araya-Letelier, Gerardo and Silva, Yimmy Fernando},
title = {Use of Abandoned Copper Tailings as a Precursor to the Synthesis of Fly-Ash-Based Alkali Activated Materials},
journal = {Materials},
year = {2025},
volume = {18},
number = {17},
pages = {3926},
doi = {10.3390/ma18173926}
}
EUVIMED