Design and Performance Optimization of a Wire-spring Based Planar Gravity Compensation Mechanism for a Robotic Arm
Journal of the Korean Society for Precision Engineering · 01.06.2026 · 43 (6) · 559-566
DOI: 10.7736/jkspe.025.00020 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the Korean Society for Precision Engineering, erschienen am 01.06.2026. Verfasst von Kyuna Park und 2 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 3.0). Gefördert von: Ministry of Trade, Industry and Resources, Korea Institute for Advancement of Technology.
Abstract (Originalsprache)
This study introduces a wire-spring based planar gravity compensation mechanism and evaluates its performance through both analysis and experiments. The mechanism features three pulleys, one spring, and one wire, all arranged in a planar configuration for compact installation within a robotic arm. A linear approximation of the target gravitational torque was derived using the least-squares method, allowing for the determination of spring stiffness and initial tension. Experimental results indicated that the proposed mechanism reduced the maximum torque by approximately 63%. However, the measured slope was gentler than the theoretical model due to friction losses. Additional tests that varied spring stiffness (k) and initial wire tension (A) confirmed that k primarily influences the slope of the compensation torque, while A affects its intercept. This finding suggests that compensation performance can be tailored to specific requirements by adjusting these parameters. The study successfully demonstrates a compact and lightweight mechanism and experimentally validates its tunability through design adjustments. Future research will focus on reducing friction, extending the mechanism to multi-degree-of-freedom systems, and validating performance under dynamic conditions for applications in collaborative and medical robots.
Förderung
- Ministry of Trade, Industry and Resources
- Korea Institute for Advancement of Technology
Zitieren
APA
Park, K., Kim, M., & Jin, S. (2026). Design and Performance Optimization of a Wire-spring Based Planar Gravity Compensation Mechanism for a Robotic Arm. Journal of the Korean Society for Precision Engineering, 43(6), 559-566. https://doi.org/10.7736/jkspe.025.00020
Vancouver
Park K, Kim M, Jin S. Design and Performance Optimization of a Wire-spring Based Planar Gravity Compensation Mechanism for a Robotic Arm. Journal of the Korean Society for Precision Engineering. 2026;43(6):559-566. doi:10.7736/jkspe.025.00020
BibTeX
@article{Park2026,
author = {Park, Kyuna and Kim, Minhyo and Jin, Sangrok},
title = {Design and Performance Optimization of a Wire-spring Based Planar Gravity Compensation Mechanism for a Robotic Arm},
journal = {Journal of the Korean Society for Precision Engineering},
year = {2026},
volume = {43},
number = {6},
pages = {559--566},
doi = {10.7736/jkspe.025.00020}
}
EUVIMED