EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Experimental Performance Evaluation of Natural Smoke and Heat Exhaust Ventilators in Accordance with ISO Standard

Jihyun Kwark

International Journal of Fire Science and Engineering · 30.09.2026 · 40 (3) · 32-43

DOI: 10.7731/kifse.930e27d6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Fire Science and Engineering, erschienen am 30.09.2026. Verfasst von Jihyun Kwark. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study experimentally evaluates the performance of natural smoke and heat exhaust ventilators manufactured and installed in Korea in accordance with the test methods and performance requirements of ISO 21927-2. The aim is to assess the applicability of the procedure and identify product-level improvements. Four electrically operated specimens—sliding and tilt types from two manufacturers—were sequentially subjected to operational-reliability, opening-under-load, low-temperature (−15 °C for 24 h), wind-load (1,500 Pa for 10 min), and heat-resistance (up to 600 °C for 30 min) tests. All four specimens satisfied the acceptance criteria for operational reliability, low-temperature operation, and wind-load resistance. In the opening-under-load test, the chain joint of the tilt-type specimen from Manufacturer D detached at 250 Pa, thus causing functional failure, whereas intermittent separation of the actuator rail was observed in the sliding-type specimen from Manufacturer Y at 500 Pa. At 300 °C, all specimens satisfied the 10% opening-distance reduction limit. At 600 °C, actuator and chain-joint damage prevented reuse; damage-induced full opening was distinguished from normal operation and exhaust-opening retention. These case-based findings identified high-load stability, joint strength, actuator heat resistance, and fail-safe retention as candidate factors for future domestic criteria. However, cumulative damage may have affected subsequent tests, and using only four specimens is insufficient to establish definitive acceptance thresholds.

Zitieren

APA

Kwark, J. (2026). Experimental Performance Evaluation of Natural Smoke and Heat Exhaust Ventilators in Accordance with ISO Standard. International Journal of Fire Science and Engineering, 40(3), 32-43. https://doi.org/10.7731/kifse.930e27d6

Vancouver

Kwark J. Experimental Performance Evaluation of Natural Smoke and Heat Exhaust Ventilators in Accordance with ISO Standard. International Journal of Fire Science and Engineering. 2026;40(3):32-43. doi:10.7731/kifse.930e27d6

BibTeX
@article{Kwark2026,
  author = {Kwark, Jihyun},
  title = {Experimental Performance Evaluation of Natural Smoke and Heat Exhaust Ventilators in Accordance with ISO Standard},
  journal = {International Journal of Fire Science and Engineering},
  year = {2026},
  volume = {40},
  number = {3},
  pages = {32--43},
  doi = {10.7731/kifse.930e27d6}
}
Kostenlos starten →