Effect of Starch Addition to Sand Mixtures on the Properties of Molding Sands
Journal of Manufacturing and Intelligent Systems · 30.06.2026 · 1 (1)
DOI: 10.71350/jmis.3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Intelligent Systems, online erschienen am 30.06.2026. Verfasst von Aysel KIVRAK und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
This study investigates the effect of starch addition on bentonite-bonded green molding sand properties using a constant total binder strategy. Unlike many prior studies where starch is added on top of a fixed clay content, the total clay + starch content was kept constant at 10 wt. % and the water content at 5 wt. %, while starch was increased to 0.5, 0.75, and 1.0 wt. % via proportional reduction of bentonite (partial substitution). Gas permeability, mold hardness, green compressive strength, and single- and double-surface shear strengths were evaluated under green sand test conditions using silica sand with an AFS GFN of 71. The results show that starch did not significantly affect mold hardness (changes
Zitieren
APA
KIVRAK, A., & Gül, F. (2026). Effect of Starch Addition to Sand Mixtures on the Properties of Molding Sands. Journal of Manufacturing and Intelligent Systems, 1(1). https://doi.org/10.71350/jmis.3
Vancouver
KIVRAK A, Gül F. Effect of Starch Addition to Sand Mixtures on the Properties of Molding Sands. Journal of Manufacturing and Intelligent Systems. 2026;1(1). doi:10.71350/jmis.3
BibTeX
@article{KIVRAK2026,
author = {KIVRAK, Aysel and Gül, Ferhat},
title = {Effect of Starch Addition to Sand Mixtures on the Properties of Molding Sands},
journal = {Journal of Manufacturing and Intelligent Systems},
year = {2026},
volume = {1},
number = {1},
doi = {10.71350/jmis.3}
}
EUVIMED