EUVIMEDEUVIMED entdecken
Crossref

An evaluation on the effect of stress and wetting conditions on engineering properties of clay–sand mixtures

İnan Keskin, Eylem Özge Atayşen, Selman Kahraman, Amir Hossein Vakili, Mahdi Salimi

Quarterly Journal of Engineering Geology and Hydrogeology · 12.08.2025 · 58 (3)

DOI: 10.1144/qjegh2025-008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Quarterly Journal of Engineering Geology and Hydrogeology, online erschienen am 11.06.2025. Verfasst von İnan Keskin und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: Karabük Üniversitesi.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the impact of varying stress and wetting conditions on the engineering properties of clay and sand mixtures, specifically focusing on how these factors influence soil strength. Two mixtures composed of 70% clay and 30% sand (70C30S), and 70% sand and 30% clay (70S30C), were prepared at their respective optimum water content (OWC) values. The samples were subjected to different durations under sustained vertical loads to simulate stress history, followed by direct shear and unconfined compressive strength tests. The results show that when the water content exceeded the OWC, the unconfined compressive strength of the 70S30C mixture decreased by up to 42%, while that of the 70C30S mixture decreased by c . 58%. The internal friction angle dropped by 6° to 11° under similar conditions. Cohesion increased with water content up to the OWC, but then decreased by as much as 35% beyond that level. Stress history also played a significant role; prolonged loading resulted in strength changes of up to 25% depending on the mixture type. These findings highlight the importance of both the water content and past stress conditions in determining soil behaviour, and offer valuable insights for geotechnical engineering applications, particularly in environments subject to moisture and load variations.

Förderung

  • Karabük Üniversitesi

Zitieren

APA

Keskin, İ., Atayşen, E. Ö., Kahraman, S., Vakili, A. H., & Salimi, M. (2025). An evaluation on the effect of stress and wetting conditions on engineering properties of clay–sand mixtures. Quarterly Journal of Engineering Geology and Hydrogeology, 58(3). https://doi.org/10.1144/qjegh2025-008

Vancouver

Keskin İ, Atayşen EÖ, Kahraman S, Vakili AH, Salimi M. An evaluation on the effect of stress and wetting conditions on engineering properties of clay–sand mixtures. Quarterly Journal of Engineering Geology and Hydrogeology. 2025;58(3). doi:10.1144/qjegh2025-008

BibTeX
@article{Keskin2025,
  author = {Keskin, İnan and Atayşen, Eylem Özge and Kahraman, Selman and Vakili, Amir Hossein and Salimi, Mahdi},
  title = {An evaluation on the effect of stress and wetting conditions on engineering properties of clay–sand mixtures},
  journal = {Quarterly Journal of Engineering Geology and Hydrogeology},
  year = {2025},
  volume = {58},
  number = {3},
  doi = {10.1144/qjegh2025-008}
}
Kostenlos starten →