EUVIMEDEUVIMED entdecken
Crossref

Corrosion Rate and Microstructural Evolution of Aluminum 2024-T3 in Nitric Acid under Various Heat Treatment Conditions

Gandhy Priyageng Bhagaskara, Ajeng Wulansari

SAINSTECH NUSANTARA · 30.09.2025 · 2 (4) · 51-59

DOI: 10.71225/jstn.v2i4.122 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SAINSTECH NUSANTARA, online erschienen am 30.09.2025. Verfasst von Gandhy Priyageng Bhagaskara und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum alloy 2024-T3 is widely applied in aerospace structures due to its high strength-to-weight ratio, yet its corrosion behavior in aggressive acidic environments requires further optimization. This study evaluates the influence of heat treatment duration at 300 °C on the corrosion rate and microstructural evolution of Aluminum 2024-T3 immersed in 68% nitric acid (HNO₃). Specimens were prepared under four conditions: without heat treatment and with heat treatment for 1, 2, and 3 hours followed by water quenching. Corrosion testing was conducted using the ASTM G31-72 immersion method at exposure times of 168, 336, 504, and 672 hours, and corrosion rates were determined using the weight loss method, complemented by optical microstructural observation. The results indicate a progressive increase in corrosion rate with immersion time for all specimens. Untreated samples exhibited the highest corrosion rate, reaching 480.88 mpy at 672 hours, whereas heat-treated specimens demonstrated reduced corrosion rates, with the lowest value of 365.03 mpy observed in the 1-hour treatment condition, corresponding to an overall reduction of up to 11.70%. Microstructural analysis revealed a transition from dominant pitting corrosion in untreated specimens to intergranular corrosion in heat-treated samples. These findings highlight the role of thermal processing in enhancing corrosion resistance and optimizing service performance in acidic environments.

Zitieren

APA

Bhagaskara, G. P., & Wulansari, A. (2025). Corrosion Rate and Microstructural Evolution of Aluminum 2024-T3 in Nitric Acid under Various Heat Treatment Conditions. SAINSTECH NUSANTARA, 2(4), 51-59. https://doi.org/10.71225/jstn.v2i4.122

Vancouver

Bhagaskara GP, Wulansari A. Corrosion Rate and Microstructural Evolution of Aluminum 2024-T3 in Nitric Acid under Various Heat Treatment Conditions. SAINSTECH NUSANTARA. 2025;2(4):51-59. doi:10.71225/jstn.v2i4.122

BibTeX
@article{Bhagaskara2025,
  author = {Bhagaskara, Gandhy Priyageng and Wulansari, Ajeng},
  title = {Corrosion Rate and Microstructural Evolution of Aluminum 2024-T3 in Nitric Acid under Various Heat Treatment Conditions},
  journal = {SAINSTECH NUSANTARA},
  year = {2025},
  volume = {2},
  number = {4},
  pages = {51--59},
  doi = {10.71225/jstn.v2i4.122}
}
Kostenlos starten →