Effect of Rolling-Induced Microstructural Evolution and Post-Heat Treatment on the Corrosion Mechanisms of Al–Li Alloy 8090-T3 in Simulated Seawater
Corrosion and Materials Degradation · 05.06.2026 · 7 (2) · 34
DOI: 10.3390/cmd7020034 ↗Kurz gefasst
Fachartikel in der Zeitschrift Corrosion and Materials Degradation, online erschienen am 05.06.2026. Verfasst von Maheshwara Reddy Jedla und 11 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: self-funded by Maheshwara Reddy JEDLA.
Abstract (Originalsprache)
Aluminum–lithium (Al–Li) alloys are widely used in aerospace applications because of their high strength-to-weight ratio and reduced density. However, their corrosion behavior can be significantly affected by thermomechanical processing and exposure to chloride-containing environments. In the present study, the corrosion behavior of AA8090-T3 Al–Li alloy was investigated in 3.5 wt.% NaCl solution under simulated marine conditions. The specimens were extracted from a plate and subsequently subjected to annealing and rolling treatments using a specially designed wedge-shaped geometry to generate a continuous strain gradient, enabling the evaluation of deformation-dependent corrosion behavior across different deformation zones. The corrosion behavior was evaluated using potentiodynamic polarization, immersion testing, and surface characterization techniques. The results revealed significant variations in corrosion behavior with thermomechanical condition and deformation zone. The T3 temper-rolled specimen exhibited superior corrosion resistance compared to the annealed and rolled conditions. The lowest corrosion rate of 0.003 mpy was observed for the highly deformed T3 temper-rolled condition, whereas annealed specimens showed higher corrosion susceptibility associated with localized corrosion attack and precipitate-related galvanic activity. Surface characterization confirmed the formation of aluminum hydroxide- and copper oxide-based corrosion products. The study demonstrates the effectiveness of the wedge-shaped rolling methodology for evaluating zone-dependent corrosion behavior in thermomechanically processed AA8090 alloy.
Förderung
- self-funded by Maheshwara Reddy JEDLA
Zitieren
APA
Jedla, M. R., Venkataramulu, R. V. K. B., Devaranavadagi, V. A., Panda, B., Jothi, V. R., Barat, K., Srivastava, M., Karodi, V., Nagaraja, S., Dhanaraj, S. B., Sridharmurthy, S. M., & Anand, P. B. (2026). Effect of Rolling-Induced Microstructural Evolution and Post-Heat Treatment on the Corrosion Mechanisms of Al–Li Alloy 8090-T3 in Simulated Seawater. Corrosion and Materials Degradation, 7(2), 34. https://doi.org/10.3390/cmd7020034
Vancouver
Jedla MR, Venkataramulu RVKB, Devaranavadagi VA, Panda B, Jothi VR, Barat K, et al. Effect of Rolling-Induced Microstructural Evolution and Post-Heat Treatment on the Corrosion Mechanisms of Al–Li Alloy 8090-T3 in Simulated Seawater. Corrosion and Materials Degradation. 2026;7(2):34. doi:10.3390/cmd7020034
BibTeX
@article{Jedla2026,
author = {Jedla, Maheshwara Reddy and Venkataramulu, Raghu Vamshi Krishna Belaganti and Devaranavadagi, Vishwanatha A. and Panda, Bijayani and Jothi, Vikram Raja and Barat, Kaustav and Srivastava, Meenu and Karodi, Venkateswarlu and Nagaraja, Santhosh and Dhanaraj, Sarvana Bavan and Sridharmurthy, Srinath Mandya and Anand, Praveena Bindiganavile},
title = {Effect of Rolling-Induced Microstructural Evolution and Post-Heat Treatment on the Corrosion Mechanisms of Al–Li Alloy 8090-T3 in Simulated Seawater},
journal = {Corrosion and Materials Degradation},
year = {2026},
volume = {7},
number = {2},
pages = {34},
doi = {10.3390/cmd7020034}
}
EUVIMED