Design, Kinematic Analysis, and Scaled Prototype Validation of a Pneumatic Ejection Mechanism for Supersonic Re-Entry Capsule Testing
Multidisciplinary Innovations and Research in Applied Engineering · 31.12.2025 · 2 (2) · 136-149
DOI: 10.70935/epbt3536 ↗Kurz gefasst
Fachartikel in der Zeitschrift Multidisciplinary Innovations and Research in Applied Engineering, online erschienen am 31.12.2025. Verfasst von Alfan Firmansyah Aditya Aditya und 20 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
High-altitude free-flight tests require release mechanisms capable of placing sub-scale re-entry capsules into a clean supersonic freestream while minimizing wake-induced attitude perturbations. This study presents AERO, a compact pneumatic ejection mechanism developed to support NASA SPEED-class capsule-release requirements as a scientific contribution to re-entry testing technology. The method combined wake-clearance interpretation, first-order kinematic sizing, pneumatic force analysis, CAD-based packaging, manufacturability assessment, and scaled prototype testing. A two-projectile-length clearance distance of 1.33 m was adopted, giving a required initial velocity of 5.11 m/s for a 0.5 s separation target. The full-scale analytical model predicted an ejection velocity of 5.2 m/s and a 0.44 s separation time at 0.5 MPa; increasing the operating pressure to 1.5 MPa increased the velocity to 9.7 m/s and reduced the separation time to 0.15 s. A 30% scale prototype using a 32 g Genesis Firefly capsule model showed a pressure-dependent height response, increasing from 63.0 cm at 0.2 MPa to 136.8 cm at 0.6 MPa. These findings provide analytical and scaled-prototype evidence that a pressure-tunable pneumatic architecture with a balancing hugger can support rapid, repeatable, and geometry-adaptable capsule ejection; flight-representative performance remains to be validated.
Zitieren
APA
Aditya, A. F. A., Wicaksono, B., Mukhlisin, A., Ardiyanto, N. H., Sirat, R. R., Salahudin, M. R. A., Abdullah, A., Mardiansyah, A., Sistiawan, M. R., Alamsyah, R., Sulistyo, R. D., Firmansyah, A., Musthofa, L. I., Putra, Y. A. D. S., Maulana, A. Y., Jatmiko, P. P., Aliansyah, M. T. A., Fernando, J., Kuncoro, P. D., …, & Falah, F. (2025). Design, Kinematic Analysis, and Scaled Prototype Validation of a Pneumatic Ejection Mechanism for Supersonic Re-Entry Capsule Testing. Multidisciplinary Innovations and Research in Applied Engineering, 2(2), 136-149. https://doi.org/10.70935/epbt3536
Vancouver
Aditya AFA, Wicaksono B, Mukhlisin A, Ardiyanto NH, Sirat RR, Salahudin MRA, et al. Design, Kinematic Analysis, and Scaled Prototype Validation of a Pneumatic Ejection Mechanism for Supersonic Re-Entry Capsule Testing. Multidisciplinary Innovations and Research in Applied Engineering. 2025;2(2):136-149. doi:10.70935/epbt3536
BibTeX
@article{Aditya2025,
author = {Aditya, Alfan Firmansyah Aditya and Wicaksono, Bagus and Mukhlisin, Akhmad and Ardiyanto, Nur Hadi and Sirat, Rajni Rizkia and Salahudin, Muhammad Rafi Akbar and Abdullah, Afzalurrohman and Mardiansyah, Alfin and Sistiawan, Muchammad Rifki and Alamsyah, Rajib and Sulistyo, Rahmat Dani and Firmansyah, Ade and Musthofa, Luthfy Iqbal and Putra, Yoga Aditiya Dwi Syah and Maulana, Ahmad Yusuf and Jatmiko, Pandu Priyo and Aliansyah, Muhammad Thoriq Akmal and Fernando, Johnson and Kuncoro, Prayogi Dwi and Kinasih, Diah Ayu Suci and Falah, Fajrul},
title = {Design, Kinematic Analysis, and Scaled Prototype Validation of a Pneumatic Ejection Mechanism for Supersonic Re-Entry Capsule Testing},
journal = {Multidisciplinary Innovations and Research in Applied Engineering},
year = {2025},
volume = {2},
number = {2},
pages = {136--149},
doi = {10.70935/epbt3536}
}
EUVIMED